粉丝2223获赞5496


一招解决水面踢,水蛙会仰泳前进!今天呢,说一下我好兄弟刘 pro 的这个水面炸裂袜,市面上所有的炸裂袜呢,基本上都会出现仰泳的情况,虽然这个不影响我们平时正常的坐钓,但是呢也是有办法去改善这一点的。 第一个比较简单的办法呢,就是用哈亚布萨这个弹簧的负铅钩 f f 二零八,这样呢可以使他的重心朝下,这样你的话就不会仰泳了。如果不使用负铅钩呢,也要使用这种弹簧钩, 使用这种弹簧钩需要把弹簧从蛙的下巴处开始卷入进去,这样的话就你的蛙头是被踩在水面上收的哇。

over the years, i've kind of become known as a buzz bait fisherman i made a ton of money on it i've called them all over the country on a buzz bait and i love throwing it it's probably my favorite bait to throw anywhere in the country but there's some things i like to do with my buzz baits to make them kind of stand out from everybody else's and i think it gets me a few more bites on them and hooks fish, a little bit better so i almost always throw a zoom horny toad own a buzz bait this is a green fish tackle toad total buzz bait it's one i designed i've been doing this since i was twelve years old the horny toad on a buzz bait i used to cut the sides off of buzz bait with side cutters grind them on the concrete or with a file whatever to make this profile but actually started pouring these two specifications of the ones i used to make myself so what this is it's roughly a three eight sounds weight on the buzz bait shank and it has no skirt as you can tell it's just a hook mounted to the wire and what always do take the zoom horny toad when you're rigging these so the first thing i do with this one in specific this keeper here is not necessary with the horny toad because of the texture of the rubber so the first thing i do is either clip it off or mush it down just take your pliers and mush it so it's not there anymore and that'll keep you from splitting your horny toes because they're a pretty tough bait you don't really need it in a lot of baits they're pretty tough so you got your round cylinder shaped lead here when you're hooking the horny toad this is where people run to a lot of problems when it comes to horny toads if you don't get this bait dead straight on the buzz bait with the lighter weight if it will run on its side or roll around and just not run effectively, so what i like to do this is a little trick, a lot of times i regum right side up because i've hooked so many that i can get it perfect, but one of the easiest ways to hook this horny toad straight is actually hook it upside down that way you have this crease here you've got the little belly crease on a horny toad that kind of lines you up, you can just follow that all the way down the bait and it gives you a reference point to make sure it's your dead straight and i come out with my hook on this buzz bait i come out all the way between the legs it can vary on shorter hook bait, but come out between the legs and then you have to slide this bait entirely around the lead without it around the lead you don't get that profile some some horny toe buzz baits are designed to slide up to the lead and i don't think you get that profile that you get with the lead entirely inside of the bait, so i push this bait all the way up as you can see it's dead straight on here and there is no lead showing the reason i like the lead inside because this bait you don't think of it, but this is one of the most skippable baits there is most people skip jigs under docks, i skip a buzz bait it's one of my favorite things to do is skip this buzz bait like this under a dock, it'll skip just like a jig, a wacky worm, a fluke it skips great so once you've got your horito rigged there's a few other little custom modifications i like to do to my buzz baits so what i do first this buzz bait we're on the boat so i'm not gonna be able to fully do this it takes some pliers and things like that, but you straighten this up out and take the blade entirely off the buzz bait, i'll bend this i probably can straighten it out here straighten this l bend out that comes on all buzz baits straighten it out and take this little clevis completely off all right, so i got the clevis that's on the bottom of the buzz, but it's off i take my blade off and you want to bend both ends of the blade to perfectly 90 degrees where the wire would attach to the blade bend on perfectly 90 degrees generally and these things are manufactured they're not at 90 degrees exactly and then i will take a handheld drill and actually drill these holes out on both ends you hear people talk about oh, i've got the perfect tuned buzzbait or i let it hang out the truck window for two days to get to that tuning well, what that is to make that squeak that you hear from buzz baits that is when the wire on your buzz bait is much smaller than the hole on your blade, so you can just make that instantly by taking your blades drill out the hole obviously you don't drill it too big to where it just brakes and wears out but you drill out this hole to make it much larger than the wire then it gets a wobble to it and that's where you get that squeak so after i do all that straighten it out we put them back together you got your 90 degrees on the blade and your holes drilled out a little bit wider put your blade back on put your clevis back on put that back on a bit in your back your 90 degrees just basically put it back the way it was but one last thing take that clevis there the bottom, one and crimp it so that it can't move it's stuck at the bottom that gives a flat surface for that hole you drilled out the 90 degree bins you put on the blade it gives a flat surface to spin on that gets you that good squeaky noise just a few little tricks to make your buzz bait sound like that perfect broken buzz bait with instantly i mean you can take it out of the pack do these modifications to it and it'll sound like a buzz bait you've been throwing for two days when they get perfect so i do to every buzz bait i'll be throwing a tournament situation just to get them ready to go。
