开源掌机连机教程开源掌机要想实现连机对战,两台掌机必须要有 wifi, 可以是内置 wifi, 也可以通过 og 连接外置 wifi 三五一 p 我用的这款支持五 g 的 wifi, 供大家参考。连接这个操作以前玩 ogr 的时候我就折腾过,不是很顺畅, 可能和那时候用的 y i 不是五 g 有关,也可能是这几年系统和软件都有进步了。看演示画面的表现,连击很流畅,几乎没什么延迟,画面同步展示也是很正常的, 没有出现其中一台画面迟滞的现象。刚才是演示画面,现在实际操作 底下看看。投币开始,游戏选择角色,进入对战, 测试一下移动和攻击,连击效果还不错。在准备连击游戏之前,有几个地方要注意,最好是用同样的系统。两台机器我都用的 us, 游戏和核心都要用同一个,不然是连不了机的。有些核心是不支持连机的,比如 fef 二零一二,这个在开始连机时会提示 core not support net play 核心不支持联机。下面开始讲联机教程。拿魂斗罗这个游戏来举例,核心 是 sem, 检查一下无线都已连接好了,两台机器都启动游戏。先操作,要做服务器的机器进入,绕菜单 退到上层菜单,进入联机菜单, 选择主机作为游戏主机,这里有可能失败,游戏闪退。再次打开试一下,屏幕上显示了建立联机服务器成功的提示。 接下来操作客户机 进入连接菜单 最下方刷新局域网联机列表 下面出现了一个本地 another must 项目,这个就是主机建立的房间了,选择此项并确认连击成功, 游戏画面开始同步显示主机,选择双人游戏开始,两个机器都试验一下, 现在这两台机器已经可以联合作战了,如果联机菜单中刷不出局域 网列表怎么办呢?可以用 ip 地址直连的,在主机的网络设置中 可以看到这台机器的 ip 地址,记住这里的 ip 地址 进入游戏。在联机菜单中创建主机客户端,进入联机菜单, 选择连接到连接主机,这里要输入刚才我们记住的 ip 地址, 输入完成后按 start 确认 同样成功连接了主机。 以上就是开源掌机连击的教程, 有什么问题可以在评论里发出来,我看到会进行解答, 谢谢!观看请点赞关注我吧!
粉丝164获赞1124

这期我们讲一下 rgb 二零 s 的一个机组操作,首先呢,嗯,这款机器呢是有两个卡槽,一个系统装系统卡的,一个是装游戏卡的,这是开关键电源,这是复位键,这是声音按键。 那首先我们把系统卡插上来,然后我们再把游戏卡插上, 这个机器呢,他需要两张卡都插上,否则的话他是无法开机的,你只插一个系统卡,他也没办法开机,你只插一个游戏卡,他也没办法开机,因为两个都需要,都有很重要的程序,所以说开机的话我们大概等个艾格 十来秒。游戏有内置一两万款游戏,基本上到手的话大部分都可以直接玩,无需做任何其他方面的设置。 那我们进入游戏,进入一个系统之后,他会出现啊模拟器的列表,这是一个接机的经典的,然后包括 cps, onescps, twocps, three, 还有 一些简单的经典的 c 红麦机的,然后 sfc 的, 包括一些改版的游戏,还有 n 六四游戏。模拟器很多啊,最高只知道 psp。 那我们首先简单的进入我们讲一下接机的 阶级,里面是分为改版阶级跟普通阶级的,改版阶级有很多 一个改版捷径,然后很多的一些经典的三国战器,神仙佛木,西游,射转,这些都是可以。 那我们现在进点进个三国战机看一下, 进入之后呢,死类的是投币,然后死大的是开始,这样的话我们可以实现无限投币的选择,无价震爆模式简单一点,这个经常玩的以前喜欢的张料,那这个时候摇杆 是可以操作的,然后十字架也是可以进行操作的,操作的话就能很流畅。 好,然后我们退出游戏的话,有两种退出方式,第一个是同时按这两个按键,我们这边有一个关闭游戏,对吧?然后我们关闭游戏, 呃就呃就可以退出游戏了。另外一种是,呃在这边也可以进行保存加载啊。另外一个就是 强制退出,直接快速此类的,跟斯大利剑这两个键同时按两次,他就直接退出游戏了。大部分的模拟器游戏都可以以这种方式进行退出。 那剩下的还有一些 psp, 我们看一下,这是最新移植的一些呃,仙剑奇侠传,然后包括还有 一些忍者神龟,然后还有一些蔚蓝以及 暗黑破坏神,新陆谷物语,这些都是一些比较经典的 pc, 这都是移植过来的,目前这些游戏都可以玩,所以说可以尝试一下。然后这边 psp 的话是也是有大量的一些 psp 游戏啊,火影忍者 psp 我们先进一个游戏啊, psp 的情况他是一个单独的移植模拟器,他也可以进行强制推出,但是如果有些菜单保存的话,他就不是带这个双摇杆了,他这是单独按右摇杆,这边会有一个 psp 的单独保存 加载,然后如果退出游戏的话,可以从这边选择退出,按 b 键,这边是 b 键确认,然后我们退出程序也可以退出了。 那我们先来讲解一下基础的一个在这个界面按此类的界的话,它是进入一个屏保的状态,自己会跳游戏的,那我们返回。如果进入游戏阶段, 我们按室内的键,它是可以做到一些编辑更换核心的一些操作 for, 然后按死搭的键的话就是显示设置,如果亮度太亮的话,你可以调下来,正常我们调足够了。然后 ui 的一些切换,我们可以切换各种其他的 ui, 然后主题游戏列表的样式, 然后包括启动到特定平台开机,启动启动。 然后这边声音设置,声音,如果说觉得小的话,可以把这边增加大,或者说直接按这个声音增加减键,他是可以直接增加的,增加减的。 然后一些基础的模拟器设置,这些基本上已经给官方出场的话已经设定好了,无需设定。那有 游戏的话,呃,基础上的一个操作就在这里了。嗯,我们关机的时候按此大的键,然后找到退出,然后关机,确认关机,这样就可以了,等它关机。

今天教大家一下怎么样去把这款开元游戏掌机的画面调整成和我们小时候玩 g b a 一样的滤镜啊,点击 f n 键,然后在快捷菜单里面直接去点击着色器,在着色器里面的话直接点击 加载,然后点击中文滤镜,点击 c r t 扫描线,这些的话都比较像小时候玩的 g b a 啊。然后你可以从一二三四里面去选,看哪个比较喜比 比较适合你。然后如果你想关闭掉的话,也很简单,直接把上面的视频着色器直接点击关闭,然后直接 fn 键回来,他就会变成一个高清模式啊,看看是不是学会了呢?

今天呢给大家说一说这个开园长机是如何添加游戏这个异系统,这是官方的系统,其他系统呢?其实操作逻辑差不多啊,你学会这个之后,其他的就可以去添加了,这里我们需要用到电脑, 需要将文件给导入进去,就不用去说了。之后呢,咱这个游戏是不是有这个图标,包括有什么呢?有这个演示的一些动画,那他怎样添加?包括游戏的名字,你的动画,还有你的视频是怎样识别? 还有游戏是有一个游戏列表,那怎样去输入这些代码呢?今天就给大家详细的去说一说。好,那么就移步到电脑端,详细的给大家说一说吧。移步之前呢,这里先给大家说说啊,你的这个涨金呢,一般都是有什么? 一个是系统卡,一个是游戏卡,我们要把游戏卡给取出来,关机取出插入到你的电脑上, 插入电脑上之后呢,发现有好多文件夹,对吧?就是你对应的哪个游戏,你就添加到哪个游戏文件夹里边,比如说我想添加的是 ps t 的游戏,那就找到 ps t 的文件夹, n d s 的话就找到 n d s 的文件夹, n e o 呢,就找到 n d e o 的文件夹,以此类推啊,那这是我们的游戏文件,一般都是 iso 或者是 c s o 这个结尾的文件, 这个呢就是我们的游戏的目录,这里可以根据大家签约的游戏去进行添加目录的,要不然不去识别他啊,会识别不到他的, 然后我们是用记事本打开它,比如说我现在添加的是什么呢?合金弹头 x x, 我们就在这个目录里边,怎样啊?将这一栏给复制啊, 复制一下,复制成一模一样的,复制到最后从这开始我这已经有了,这里给大家就演示一下。 复制好了,我们发现这里是什么呢?是一个游戏的名称,加点 iso, 这个也可以是点 cso, 是根据你的游戏格式的啊,这里呢我就将给它改成什么呢? 将它改成合金弹头 x s, 空格也要打上,这是 c o c s o。 合金弹头,我们就把它改成 c s o, 大小写也要区分,大家记得, 然后名字呢,开头是一个合合金弹头,那就是 h, 最后这里改成合金弹头 x x, 那这里边呢,也要改一下它的 名称,改成它的首字母都是咋写的?心蛋头,然后空格 x x, 这个 i m a g e 呢,就是我们的什么呢?图片啊,图片的所在位置,一会给大家说一说,这里呢也要改成我们的什么呢?核心弹头叉叉, 你这个图片呢可以自己自定义啊,要是 png 格式的。之后呢,这个 video video 呢,就是我们的 预览视频的位置,这里要改成核心弹头 x x, 这样之后呢,基本上就成功了,还差一步,差哪个呢?记住他的文件的结尾,这个结尾我们需要复制过来。 好,我们发现每个文件呢都是这样的一个排布,所以说我们增加其他游戏的时候呢,也是跟这个是一样的。 之后呢给大家说说我们的图片和我们的预览视频放在哪里,记得保存一下啊,我是已经添加过了,我就不保存了。在这个 meteor 就是媒体 m e d i a。 第一个呢就是我们的图片 png 格式的,比如说刚才是一个核心弹 头空格 x x, 大家一定要记得这个名称一定要是一模一样的啊,然后是 p n g 格式的,就是我自己找的,这个我念啊,这个大家也可以自己进行更改, 久等的看预览视频是在 video v i d e o 这个里边有核心弹头 x x 的预览视频,这个也可以自己去找,尽量小一点吧, 简单让他在三兆两三兆左右,这里可以用到我们上期的 pp 的这个文件视频转换的工具,这里我会分享在评论区,大家可以去下载啊, 将它质量稍微调的差一点就可以了。然后我们的预览图片和预览视频就有了, 而且我们的游戏列表也有了,有了之后呢,这个整个添加过程就完成了。其他的游戏呢,也是一样的,比如说 ps 一的游戏第一个文件夹 就是说什么呢?预览图,大家一定要记得预览图的名称要和游戏的名称是一模一样的,包括游戏列表里边的名称也要严谨一点,也是一模一样的,这个包括他的后缀区分大小写,要不然你会识别不出来的。 确认完成之后呢,就可以将我们的这个 u 盘给退出了。好,我们内斯卡插入之后呢,在这个 psp 文件里边就出现了新的这个游戏文件了,包括有绿色图,还有什么呢? 就是略缩的视频文件了,这样就已经天涯成功了。好,那本期的视频也就到这里了, 就是给大家讲一下开园长机如何添加游戏的教程啊。好,那本期就到这里了,大家如果喜欢的话,记得一键三连哦,这里是玩具社,我们下期再见。

这期我们讲一下连发件的使用怎么设定,我们找一个经典的游戏魂斗罗, 魂斗罗的话我们也知道有,虽然他已经有一个莲花剑了,包括其实合金弹头啊这些游戏都可以设定。然后我们先简单的演示一下 所谓的莲花剑的话,就是基本上你可以解放一个攻击双手,这个时候我们看到就是说我们攻击要么一直按着对吧?要么就是呃单独按一个个按我们莲花剑的功能的话,基本上就是它的自动攻击属于 呃设定的话,就是同时按两个腰杆进入后台,那我们返回设置到输入,找到输入,这个 导到最底下端口一控制,在最底下有一个设置连发,我们连发键的话目前是没有设定的,那我们正常设定为右摇杆。好,那我们现在返回, 返回的话我们只需要按一下右转,他就已经自动攻击了,这个时候我们只需要控制人物以及跳,然后我们再演退出演示一下那个合金弹头,这是经常可能要用到的。关闭游戏 退出, 我们找到合金弹头,合金弹头在 aneuguv 里面, 合金淡透。好,我们随便找一个 合金弹头,轻柔允许 随便买个游戏都行。现在核心探头大家一致的核心探头是没办法研发的,所以说我们设定他一下 也是在同样的方方式里面设定输入,找到,找到最后的端口议,然后 我们设定秒发为右摇杆。好,那么我们现在返回游戏, 那我们现在按一个月吧,他就已经连续攻击了,无需我们去。嗯,这就是设置里面发发了一个叫啥?

看到有小伙伴他进入的一个儿童模式啊,我们先看一下啊,在这个 ui 设置里面,然后清洁儿童模式,我们看一起,对吧? 他这边有提示了,上上下下左右左右 ba, 然后是一个解锁的啊,所以有些他们不知道,然后我们确定 好儿童模式的话,所有的游戏都隐藏了,然后遇到这样的问题,还有精简模式也是一样的,这个时候我们怎么处理呢?在这个界面,然后 上上下下左右左右 ba, 好揭开了,对吧?然后我们再看一下,呃,精简模式啊, 精简也是一样的,接看一下,精简的话是导致有些菜单食指选项都没有了, 所以说要恢复也是一样的恢复方法,上上下下左右左右 da 好出来了, 所有的设置就出来了,之前是没有的,所以说这两个是一个是防止儿童玩的,不让儿童玩的,就是呃,完全没有游戏。第二个是精简模式呢,就是 有一些设置功能就关闭,只做最简单的玩法,直接可以玩,防止就是说别人玩的时候操作呃,误误操作了,导致出现了问题。 第三个就是完整模式,就是我们现在这样的完整模式,恢复的话就是在这里恢复。


好,今天我们来说一下呃, rg 三五三 vs 的一些基本操作啊,如需要购买这个游戏卡的那个副卡的人,可以去闲鱼。呃,跟这个账号同名, 找用户名是开元掌机设置的,这个呃余小付吗?可以来找我。好,继续。我们说我们这个呃三五三的一些东西,幺三五三是用的,呃,比较那个 es 最新的那个,呃, 掌机里面最常用的一个就是什么 e s 系统,它底层是 i m, 呃,它的设置跟以前最大不同是它是很多,呃,比方说它的那个掌机,呃,模拟器里边它其实有很 多的好,比方说我们进去这一个模拟器,我们找 fc 好了。来说一下那个任天堂八位级的啊,进去以后,然后我们按这个 cl 键。好,进去以后呢,有一个游戏设置, 不是游戏设置,高级游戏系统设置选项,然后里面就能看到一个模拟器,这里面有很多,一般情况他的自动肯定是选择第一个,但是有时候 你的模拟器吗?就是怎么说呢?有的游戏是不能运行,那你可以在里面重新选择一个,一般情况下是第一个分这个他两个兼容性最好。这两个是有些特殊的游戏情况,比如说中文的,或者是改版游戏,如果不方便玩的话,这两个选项, 呃,这两个可以是这两个好,我们就选择自动好了。然后呢这里就是游戏,一些游戏的笔一般选择自动就可以了,然后视频模式, 这是他就是他的这个屏幕的分辨率,然后图像屏画面,如果是选自动的,他默认是关的,然后你打开他会就会减小他,减少他的的锯齿状况, 倒带购买这个就不用说了,自动保存的话我个人不建议开,因为开的话可能会,就是有一些就是副作用吗?就是可能会导致这个就是游戏的存盘,存盘失败或者什么,个人不建议开 自动,我是不不开的。然后着色器哇,就是一些那个滤镜吗?你比如说弯曲 增强一些特殊效果吗?一般这根据个人需需要吗?整双狮子这个就不用说了,就是按照那个游戏他本身的比例来进行,是装饰框或者弹性啊,其他的些就是这个是些那个特殊的选项,我们就不用看了,这记住就可以了。 好,我们随便进个一九四好了。好,现在可以了, 好完是正常完。然后一般情况下中间这个键是呼出 r i 的菜单, 有些情况下是还要按住这个跟 b 键才能呼出这个菜单,然后这里就能看到一些基本操作,截屏了,上单什么的,因为都是中文嘛,这个基本上也是很容易看的。一般情况下设置的话 是在选项里边,选项里边通常是这个模拟器的核心的一些设置,当然通常情况你不要去动,因为动的话你可能会产生一些副作用嘛,对吧?然后包括金手指,金手指这个我们以后有机会再说。 然后先设置吗?还有个存盘,存档什么的,存档的话就是 自动保存状态跟自动加转,最好是关掉,因为这个东西。呃,就怎么说,你可能保就是退出,说不正常的话,他可能会导致这个存盘坏掉, 然后所有玩游戏的时候就是说你重安盘以后不要直接关机,而是选择这个退出程序啊,这样退出 这样的存盘才会比较正常的能够存下去。好,这个视频我们基础的东西先录到这里,好吧?剩下的我们下一次视频再说。

游戏遮罩呢,对复古游戏的提升感觉还是非常大的,今天呢咱就给大家说一说游戏的遮罩如何设置。首先呢,大家最好是安装天马记的前端啊,它是自动识别游戏的遮罩的,这个文件呢,我会分享在评论区的置顶, 大家有需要可以自己进行获取。其实天马界呢,将这个各种的游戏都给集合在了一块啊,这里再次感谢跳坑者联盟,天马界的一些复古类游戏啊,像 gb, gba, gbc, s, one, tce 等等的一些副游戏,他都是用的全能模拟器,二 a 模拟器来运行的,像 ngc 这些呢,用的都是独立模拟器。那今天就详细的给大家讲解一下。今天呢是中秋节,祝各位朋友中秋快乐!我为了简单的设置呢,我其实套用的是一个 沙雕三点五的一个遮罩,因为三点三点五呢,也是一个十六比九的屏幕,更为简单的去设置他的遮罩更为方便啊。咱就进一个 gb 的游戏给大家说一说 gb 的遮罩如何设置,包括其他的复古类游戏也是一样的, 能看到机密呢,是两边有遮罩的啊,点一下双 s 按键就会进到 i 的相关设置了,我们点快捷菜单找到遮罩,遮罩显示肯定是要打开的啊,如果用的有沙雕三点五 那个遮罩预设的话,他这里会自动的添加到,真的遮到预设里边,这个不透明度呢,也可以自己进行设置做法呢,大家注意看后边的画面,大小是变大了对吧,看到了吧,注意看后方,这是可以调整大小的, 这是宽高比例的调整,水平位置的调整,这是左右水平位置啊,这都是中文的,大家认真一看就可以详细的去调整一下了。还有就是视频这里一定要设置一下,再设置视频播放, 整倍数缩放要给打开啊,宽高比呢,大家可以去查一查,像 gb 他的分辨率是多少,一倍分辨率是多少,你想放到七倍分辨率,就是他会等倍的去缩放,而且这个缩放的比例也不会去变更啊。调好之后呢,大家记得要去保存在菜单快捷,菜单 往下去拉一拉,有独立配置,点一下保存游戏文件夹,独立配置等于说这个游戏所在的文件夹,所有的 gb 游戏都能保存为刚才你调整的状态, 还是非常方便的。有些朋友就问说,哎呦,那我这个遮罩为什么这次调了之后,下次怎么还要重新设置一下,就是你这里没有保存啊, bc、 gba 其他游戏都是一样的,这个遮罩都是和刚才一样,可以进行大小整备处缩放, 还有一些扫描线什么的都可以自动进行调整。我是基于沙雕三点五,所以说好多地方都已经自动预设好了,只需要大家去根据自己的屏幕大小去调整一下就可以了,调整完之后记得保存一下。这个 nds 游戏呢,用的是独立的模拟器啊,他需要进行一定的三观设置啊, 看一下,找返回,看到有一个菜单,找哪个呢?找编辑屏幕咱就随便选一个,比如说我选横屏模, 这里呢选择调整屏幕大小,选择一块屏幕这个右下角就可以去拉大小调整了,他可以大小调整了, 这是大家去根据自己的屏幕大小去调整,刚好和这个后边的遮罩,就像三 ds 的遮罩啊,大小调整一样就可以了。然后呢,记得在菜单这里 点一下保存,为全局布局,这样的话你打开其他的 nds 游戏的话,也是自动保存好了, 就不用再去调整。然后呢就是给大家说一个特殊的游戏啊,是 ngcngc 的游戏呢,原本是一个方屏的, 怎么把它设置成十六比九的屏幕呢?那直接看一下运行效果啊,这是一个满屏的十六比九,如何设置?需要大家去添加一些金手指代码, 我们找到 n g c 的模拟器,海豚模拟器,点击之后找到 n g c 的游戏,长按相关游戏,找到金手指 这里,在 g e c k o 的代码这儿添加新的 g e c k o 代码 名称这里都可以随便去起,代码呢就是这个代码是六比九的,这个代码添加完成之后记得点一下对勾啊,然后设置里边一定要把金手指给打开, 找到常规这有一个启用金手指,将它给点勾,要不然你这个金手指是不能用了。黄昏公主也是一样的,也是在这里去添加代码, 添加一个十六比九的,他的相关代码呢是在这好基于沙雕三点五的 关车照呢,我会分享在评论区置顶链接,大家有需要记得去下载哟。然后相关设置呢,就可以按照我视频当中的进行设置。好,本期就到这了,如果帮助到大家的话,大家记得一键三连哦,这里是玩具社,我们下期再见。

天马记前端相信各位都不陌生,那么今天要做的便是天马记前端的一个小白安装教程。首先天马记并不是一个模拟器, 他只是把所有的模拟器都整合在了一起,以一个更直观漂亮的方式而展现,让仅仅只是看游戏列表都成为了一种享受。天马记前端几乎囊括了 ps 二及其以下所有的老机型模拟器, 而且做的也非常的用心啊,做了很多个主题,可以看到在主题页面里面可以更换不同的主题,并且每一种主题呢都有不同的展现方式, 可以随便切换几个主题感受一下。他不是那种大同小异的主题,而是每一个主题都有不同的风格, 我比较喜欢用的呢是这个格子主题啊,并且呢,他所有游戏都是给搭配上了封面 视频简介,还有一个文字简介,所以让你更直观啊,单是看这些模拟器以及游戏的简介都成为了一种享受, 进游戏也非常方便,不用再单独的模拟,去里面去寻找 room, 直接在这里面找好游戏。并且背景音乐的话,不止可以用所有游戏视频简介的自带背景音乐,还可以修改为天马记为 为大家精心准备的上百首好听的巴比特音乐,还可以修改简介的字号大小,并且可以修改背景的颜色皮肤。 安装方式也非常简单,只需要一台 pc 设备,一台安卓掌上设备即可。打开置顶区评论我分享的跳坑者联盟发布的百度云盘连接, 打开这个连接以后呢,可以看到有一个安装程序,安装程序点开有一个安卓专用安装包, 将这三个文件全部下载到电脑上, 好啊, ok, 下载好安卓专用安装包以后呢,我们打开它,里面一共有步骤一,步骤二,步骤三三个文件夹, 我们双开一下,我们首先打开步骤一,然后将里面的天马记安装安卓模拟器合集复制,拖到步骤二里面,这里面就有三一三个压缩文件,我们新建文件夹, 新建文件夹的名字就叫做拖过来的这个压缩包的名字就可以。然后我们将 里面的所有软件解压到这个新建文件夹里,步骤二的新建文件夹里,也就是这个模拟器合集, 最后呢再将里面的安卓文件夹也拖进去, 可以看到啊,现在里面就是这些东西。然后呢这个就可以不要了, 我们现在要拖到手机里的就是 p g 开头的安卓主题包, 以及安装安卓配置,还有一个就是这个文件夹,我们将这三个拖到手机内存根目录里面即可。 我所发布的安装教程和 b 站 up 组大光圈先生可能有所不同啊,因为他是跳坑者联盟里面的成员,所以他做的视频也是最早发布教程的,做的更专业。我这个呢是小白教程, 我也是按照这个步骤来装的啊,如果还是有所不会的,可以和他的那个视频做一个相互的一个参考。我们在手机里面打开这个我们复制进来的这个安装包,天马记整合包里面,我们先 装第零个文件管理器,也就是 mt 管理器,如果你手机自带的话就不用装了,如果没有的话就先把这个装上,装好以后打开就是呈现的就是这个样子啊。然后我们用 mt 管理器里面 记住先不要装第一个天马记,这个是前端先不要装它,然后我们在手机内存的根目录里 找一下有没有 rachel up 文件夹,也就是全能模拟器的那个文件夹,以及 pexas 一个 f 开头的名字比较长的一个文件夹,如果有这两个文件夹的话,我们先将其删除,删除好以后呢,我们再 一步一步的去安装其他的模拟器,做好这些准备以后就 可以安装模拟器了。先从第二个,也就是全能模拟器 la 核心开始安装,这里有几个特殊的点要说一下。首先安装每一个模拟器安装好以后都会需要打开进入以后给予所有权限, 然后再退出安装下一个。其次有三个比较特殊的模拟器要特殊讲解一下。首先是全能模拟器安装好以后要需要加载一下,给予权限以后,等它加载完再退出。 其次第二个就是 psp 模拟器,如果你是安卓十一十二的设备的话,他会要求你在手机登目录创建一个 psp 的文件夹,你直接创建就可以。还有一个就是最后一个 dc 的蚊香蚊香模拟器啊。然后这个模拟器呢,也是需要 进入以后在左下角有一个选择,当前目录你点击一下就可以了,点击进去以后再退出就 ok。 好,安装完其他所有的模拟器以后,最后我们就安装一号天马记前端,安装完毕前端以后我们再退出进入这个天马记前端。第一次进入会有一个资源释放的过程,大概也就是两三分钟,时间不会太长, 天马记前端在释放完资源以后,先不要急着去游玩,我们打开手机跟目录的安卓文件夹 大图文件夹,然后往下拉看清楚这个文件夹, o r g 开头 进入,进入第二个 f 开头的,然后进入 texas 这个文件夹,进入的过程中 m t 文件夹可能会索要权限,我们打开权限即可,最后呢我们再退出来。 还记得我一开始让各位把一个安卓文件夹 复复制到这个整合包里面,一块复制到手机里吗?就把那个安卓文件夹,把它覆盖到手机的安卓文件夹 覆盖就可以,如果这一步覆盖不了的话,我们还可以找到你电脑上一开始的这个安卓文件夹,也就是一开始不是我让把安卓文件夹复制在这个整合包里面吗?一块拖到手机里的,也可以把这个文件夹 重新再覆盖到手机的这个安卓文件夹,覆盖一下即可。全部做完以后呢,我们这个时候 前端就已经安装好了,我们直接就可以进入前端了,但是你进入过程进入以后发现没有游戏,这个时候就需要在电脑上去下载游戏,也是还是这个跳坑者联盟的 百度云盘啊,我们可以看到一开始我们就下载了一个安装程序,实际上数据列表呢,里面是一些 独立的一些数据啊,其实我是没有用啊,还有一个补丁工具,补丁工具里面也是有一些通用的一些像滤镜啊,还有一些调用 这个东西根据自己的需求去安装啊,反正我也没有用,最主要的就是数据文件,这个是最耗时的,我们找到安卓加 pc 专用 rom, 你看都是分布好的游戏呢?放在哪里呢?游戏是放在 安卓设备的话,我们可以看一下, 如果是手机内存的话就内部储存,然后我们再 登目录,直接创建一个 roms 文件夹,然后不同的游戏呢,你下载好以后,他会你看 s s 模拟器 p s e 模拟器 s f c, 他名字是创建好了的文件夹,你只需要将 游戏考在这里面就可以,如果是内存卡的话,一样跟目录创建若木斯文件夹即可。创建好若木斯文件夹以后呢,我们根据需求,比如说 ps 一游戏,我们打开以后有 ps 一说明, 里面可以看到它里面有很多压缩包,比如说我想玩北斗神拳,那么我们就下 party 文件, party 一文件夹,如果是像玩少年佣兵团梦幻模拟战,我们就下第二个 压缩包。下载好以后我们将后缀删除,可以不用他的那个,专门他给提供了一个那个压缩的那个,但是有的小白可能不太会用,那我们就把 把这个后缀名删除以后,只留七 z, 这个时候他就是一个压缩包,将它解压好以后,解压密码是跳坑者联盟汉字啊。解压好以后我们只需要把它复制在 刚才说的若木文件夹,如果他是 ps 一游戏,就是若木若木死下的 ps 一文件夹。将游戏装进去以后, 装好以后呢,我们在天马前端设置最后有一个 games, 这个我们点击它就是刷新游戏,刷新完以后,你安装进去的游戏就出现了,推荐各位先下一点老游戏,像 f c g b a 这种下载很快,下好以后 装到 rooms 里面先看一下,刷新完以后没问题就可以再去安装别的游戏了,如果在安装过程中还有些不了解的地方,可以随时问我。最后再补充两个点啊,也是两个小细节,这个是手机自带的储存空间, 我们打开以后安卓文件夹就是覆盖的,覆盖在这里的就这个安卓文件夹,这是第一个。第二个呢,像 rose 是在根目录,我们点开以后游戏,比如说 gba 点开以后可以看到他游戏都在这里面。然后你下载的这个 room 那个文件夹里面呢?有一个 你找一下啊,有一个这个文件一定要确保他能在这文件夹里, 要不然他是没法调动模拟器的,这是一个点。还有一个就是有一个这个文件夹里面是关于所有游戏的简介以及视频简介都在这里面,直接也把它放在级别的目录里即可。 做完以上所有步骤呢,然后在游戏的设置里面刷新 rooms 就可以直接游玩了。 好的,感谢您的收看,我是小时,记得关注雨三连,带您了解更多游戏与掌机,再见 而你。

再说一下 ios 关机息屏,首先这有个图标,电源点了之后 r 重启 b 取消 a 关机,三个选项可以选择一个,然后 你也可以长按电源键关机, 现在就关机了, 长按电源键开机,开机之后 在设备配置里面有一个 闲置锁屏时间以及自动关机时间,关机时间也可以在这里设置 锁屏其实就是熄屏,这个 start 键就可以熄屏亮屏。

hey, everybody this is roster metro gamecore so about a week ago i reviewed this device here at the ambernick rg552 and there are a lot of things i like about this device it has an incredible screen and some really nice build quality too that being said there are a couple features that i think are missing on a device like this which costs over 225 dollars my primary concern has to do with these shoulder buttons and the lack of five gigahertz wi fi, which really makes this device not very suitable for streaming but the other concern i have is about the firmware that's available on this device the rg 552 actually ships with two different firmware options you can boot android operating system and it also ships with a version of bota sara, which is a linux based operator system in particular the linux operating system is not very well configured and so i spent the past week or so actually configuring everything to make it work a little bit better now until we have custom firmware we're probably not gonna see any performance gains, but all the same i wanted to make sure that we took advantage of the beautiful screen that we have on this device and so what i've done here is i've preconfigured all the different resolutions and aspect ratios to give you an ideal retro gaming experience and on top of that i've added a couple of quality of life tweaks for example i've improved the hot keys across the board i've also added a bunch of different themes and the ability to download new themes directly onto the device and i've also implemented auto save and auto loads so you can jump right back into your game and so while we wait for a custom firmware to be available properly on this device i figure that this pre configured sd card image is gonna be our best bet while we wait so in the video description i'll have a written guide, which will walk you through how to install all of this and obviously we're gonna do that here in this video as well and i just want to leave you with one caveat before we get into the actual video and that is that this is really gonna be meant for all of your classic and retro systems in particular, i only focused on ps1 and below gameplay because the honest truth is that the android operating system that's available on this device can run all those other systems much better than this linux one and so my recommendation is to use the linux side for all of the retro systems because the interface with emulation station is just a joy to navigate and then if you want to punch it up to some of the harder systems like psp and nintendo 64 i recommend doing that on android anyway, i think you'll really enjoy this video so without any further delay let's jump into it okay so first thing your device likely came with a 16gb micro sd card like this one and this houses the linux operating system, but it also has some files that we need too when you plug it into your computer you're going to find three different partitions the first one is called amberdick that's just a bunch of boot files don't worry about this one and the second one is actually a linux partition that's why it's not properly readable by windows but the third one is called games that's the one we need to open up here and in this partition there are two folders we need to pay attention to the first one's called save so that's where all your save games are gonna be if you have any saves you want to move over you're gonna want to copy this to your desktop and then also no matter what you want to save all these bios files? as well, these are the system files that you're going to need to run everything properly so grab that bios folder and maybe the saves one as well and copy those over to your desktop or somewhere else on your computer for safekeeping already on that previously, so i'm not going to do it here but just make sure you do that and that's it you don't need the sd card anymore go ahead and inject it the card that comes with the device isn't the best so i recommend replacing it with a sandis card here 16 gigabytes is going to be plenty of space for the linux operating system and this card is a lot more reliable on top of that you're going to want to have a storage card for all of your games as well, i recommend using a sandisk or maybe a samsung card personally i like to use 128 gigs but you could go up to 256 or even 512 one terabyte it's all up to you now on my website i'm gonna have a written guide here and this is gonna show you everything you need the most important thing here is to find the preconfigured stock linux image and this is what we're gonna burn onto that 16 good by sd card so just go ahead and click on the link here this is sd card image and then just download the file here it's going to be between three and four gigabytes altogether and while it shows a zip file here in this footage it's gonna be a 7 zip file so if you see a dot 7z don't freak out it's just a different type of file system it's all gonna work the same okay and then once you have it downloaded and saved to your computer what you want to do is unzip this file you can either use 7 zip or winrower to do this after that you're gonna be left with a dot img file and it should be under eight gigabytes altogether and this is the file that we're gonna flash onto the sd card to do that you have several different software options we're gonna use one here called win 32 disk imager but other options include belena etcher as well as rufus regardless of what software option you use it's gonna be the same process just navigate to the img file and then make sure that you've selected the correct drive for whatever the 16gb sd card is at that point click on the right button and it's gonna ask you do you really want to do this and you say yeah man i want to do it at that point it's gonna to take maybe ten minutes to burn altogether so go ahead and make yourself a cup of coffee or eat some gummy worms whatever you want to do and when it's first on writing it's gonna pop up a bunch of windows and say things about having to format the drive just go ahead and ignore all this stuff it's because it's trying to read that linux partition at this point you can close out a win 32 disk imager and then we have to use a different program now to expand the sd card partition and for this we're going to need an app called disk genius and i'll have a link to download it in the written guide if you don't already have it once it's open you're gonna want to go to the sd card here and what we want to do here is expand the game's partition so it takes up all the free space, so just right click on that and select resize partition and then just drag it all the way to the right and then select start gonna ask you do you really want to do this and you say yes this will take a few minutes to expand but after that it'll say complete and there we go the the st card is all set up now we have one last step to do before we can put it back into the device and that is to add all those bios files and like i mentioned before these are system files that are necessary to run certain emulators for example game boy advance and playstation 1 so go ahead and find that folder that you backed up earlier and then just drag all of the contents into the new bios folder and that's basically it and if you also saved off all of your save games you're gonna do that same process with the saves as well, but that's really about it after you've moved over all of your files we're ready to start working on the second sd card so i'm gonna take out the 16 gigabyte one and i'm gonna add that larger one the 128 gig one the most important thing you have to do here is you have to format it to fat 32 file system and you have to use a special app called gui format to do that again i'll have it linked in the written guide and all you really have to do here is just make sure it's set to the correct sd card card and then give it a name i'm just gonna call this one games and then press start it's gonna ask do you really want to do it and you know what to do and that's it you're done actually with the second sd card as well, we're good to go let's go ahead and put both of these cards into the device in the first card slot, we're gonna put that 16 gigabyte card with the linux operating system and on that second one we're gonna put the fat 32 formatted one that's 128 gigs and all we need to do with this step is just power on the device and then power back off again what this is gonna do is in the underlying background of the system it's gonna install a bunch of folders onto that second sd card so that way we have the correct file system when we start putting all of our games onto there so once you've booted up and close down the system go ahead and remove that second sd card and let's put it back into our computer and so just like that we now have a new file system available on that second sd card and we have a folder to put all of our different games into and so each of these folders corresponds to a specific system that's emulated in the linux operating system so for example if i want to take some of my final burneo games to play some classic arcade games i can move them over to that final burneo folder now obviously i can't share where to find any of your game files but if your device came with a separate sixty four gigabyte sd card you could actually just pull the games off of that if you wanted to or you could find them in the various ways that people find them on the internet one thing to note here is each of these folders is going to have an info text file if you open up that text file it's going to show you all the file extensions that are accepted by that particular emulator and so for this particular example i'm using gg files and they're gonna work just fine another thing i've done here as i've moved over all of my media files as well, which includes images and videos and i have a whole video guide about how to set this up ahead of time so you don't have to scrape everything on the actual device itself and that's also going to be linked in the written guide in the video description below anyway and not to belabor the point but this is basically all you have to do is just move over all your rom files into the corresponding folder and then you're going to be good to go after that you really don't need to mess with the sd card ever again on your computer except to add more games and so this is what it's going to look like when you first boot up that custom firmware, image and it might look a little bit different than the stock operating system that's because i'm using a different theme and if you go into the main menu by pressing start and then go into ui settings and then select theme set you can see that there are about a dozen themes readily available additionally if you go into the network setting section and then connect to your wi fi network you can then go into the updates in the download section and then the themes downloader and and then within there you can find a bunch of different themes that you can install directly onto your device so you're not just limited to this one theme that i'm using here you can try out whatever one suits you the best okay so like i mentioned before i actually downloaded all of my media ahead of time that's why you can see box, arts and videos and things like that and again i have a written guide that'll show you how to do that directly onto your computer so you don't have to do it on the device but let's go over to a system that doesn't have any media and i'll show you how to do that on your device if you choose to do it that way instead, so for example here on dreamcast it doesn't have any sort of media here you can go into the scrape section here and then you can set whatever parameters you'd like for example i like to use box 2d as my image source and then i also like to scrape videos as well after that you need to put in a username and password, which you can get from screenscraperfr and then select scrape now and you can start to scrape that specific section it might take take a bit to scrape depending on how big your game file list is, but once it's done go back to the main menu then select game settings update games list and just like that you're gonna have all that different media available, so you can go ahead and do this on your device or you can do it on your computer beforehand it's really gonna be up to you so now let's actually test out some games and i'm gonna show you some of the tweaks that i've set up for you here to enhance your gameplay experience we'll start with game boy first, we'll do contra 3 alien wars so a couple things are going to notice first thing here is that it has a green tint to it and that's because it's using a special colorization that gives it this kind of mild green color to it and this is my favorite look when it comes to emulating original game boy on top of that i've applied an lcd3x overlay, which is actually a shader that provides this lcd grid look here on the screen and i really like this because it just adds a little bit of an nostalgic to some of the handheld systems and then another thing i want to mention is that i corrected the aspect ratio to be appropriate for the original game boy it does result in some black bars on the left and right, but it just looks a lot better when it comes to the original aspect ratio and one other thing i've done is i've changed all of the hot keys to function off of the select button instead of the f button which is on the bottom of the device so to exit out of a game you hold down select and then press start twice and personally i find that commo to be much more comfortable than trying to use the f button which to me is too close to the reset button on the bottom here so one other thing i've done is i've set up auto saves and auto load what that means is as soon as you close out on any game it's actually gonna save it right before it closes out and then when you start up that same game it's gonna load that exact spot that you close it out on earlier okay i've actually set up a whole hot keys section for you in the written guide, but let me show you if few of them real quick if you hit select and y it's gonna toggle the frames for second if you hit select and a it's gonna pause the emulation and then if you hit select next it's gonna bring up the retroarch menu and then also if you hit select and b it's gonna reset the game for you so you can get back to the main screen and that's handy if you don't want to autoload every single time you can just reset the game when you start it up next time if you hit select an r1, it's gonna do a save state and then if you had select an l1 it's gonna do a load state and that's handy if you want to save a game at any time on top of that if you hit select an r2, it's gonna toggle fast forward that's really good for role playing games when you don't want to sit through all the cutscenes and i've also set up a rewind function with select an l2 and this doesn't work on every system but for game boy it does work so if you happen to die you can hit select an l2 and it's going to rewind back a few seconds so that you can maybe try over again yeah in my example here with game boy this is how everything's gonna work and game boy looks just gorgeous on the screen i really love that green colorization and then you mix that with the lcd filter and this large screen everything looks really nice same goes with game boy color it's gonna be the exact same screen resolution and dimensions and everything else just in color and it looks wonderful but i would say the handheld that looks the best is by far game boy advance and that's because the original aspect ratio of three by two on this looks really good on the five by three display of the rg552 the game boy advance screen is a seven times integer scale to fill out the five by three screen here and it just looks incredible by far this is the best game boy advance screen i've ever seen and like i mentioned before the fast forward button is gonna be really handy in certain games especially things like pokemon as you can see here it's running almost 500 frames second that's gonna be almost 10 times fast forward speed and i know for a lot of pokemon players they don't like to sit through the original speed so this is gonna be really helpful now another system i spent along time with is the super nintendo, and this is using a 4x3 aspect ratio with a five times integer scale what i had to do is go into the scaling section in retroarch and actually set up a custom aspect ratio as you can see here and i have all this listed in the written guide if you're curious about it, but in the end of the day it's all been preconfigured anyway, so super nintendo games are gonna look really good here at 4x3 with a 5x vertical integer scaling, and if you haven't watched my rg552 review video i really go into depth about how great this device is when it comes to retro gaming in particular, i've seen a lot of people getting really crazy about the analog pocket recently because it does such a good job of scaling up game boy, game boy color and game boy advance games well, i would argue that the rg552 is very similar in that regard for example this is the best i've ever seen super nintendo looking on a handheld device not only does the 5x vertical integer scaling just look gorgeous on this, but the performance is really good as well, and you know it's kind of apples and oranges the analog pocket uses an fpga technology which is different than emulation but all the same the end result is very similar on their rg552 at the end of the day this is probably the best i've seen most 8 and 16 bit systems ever look on a handheld device and a lot of that has to do with the high resolution 5 by 3 display that's available with this device in particular and so yes, i get the fact that this device is expensive it's 227 dollars retail right now, but i don't know if i take a step back and i kind of look at this device on its own and i don't pair to other devices the end result to me is still the same, it's giving me some of the most incredible 8 bit and 16 bit gameplay i've ever had on a handheld and to me that experience is worth 225 dollars because it is so good with that being said you know at that price point you should expect a lot more out of a handheld device especially when looking at the competition but all the same if somebody came to me in the middle of the night and said, hey give me 227 dollars and i'll make every nintendo and super nintendo game work on a handheld device and it'll look perfectly for the rest of your life i would probably go immediately to an atm right then and there anyway, i'm gonna end that rant right here, but i'm just gonna say that i'm really happy with the rg552 and i've been enjoying it more and more each day especially when i think about it in the context of 8 bit and 16 bit gameplay now like i mentioned the intro the linux operating system isn't really great for high end gameplay but it can do better than 16 bit systems too for example playstation 1 works really well too now i've set this up for a 2x resolution upscale and so your games are gonna look a little bit sharper on this end than it does on the original playstation 1 with that being said on the android side you can usually do a 3x resolution with no problems but all the same playstation 1 looks really good at two ex resolution as you can see here too on top of that i've really been enjoying the arcade gameplay on the linux operating system too for the most part final burn neo and main 2003 plus are gonna be your go to cores when it comes to arcade emulation and unfortunately it won't play some of the high end stuff like tekken or killer instinct, but all the same your mid 90s and below games are all gonna play flawlessly now the aspect ratios on arcade games varied by game, but i do have this firmware image configured so that it should just on the fly, but that being said if you do come across a game and it's not showing the correct aspect ratio, it is pretty easy to make some changes on a per game basis so before we wrap up here let me show you how to make some changes in case you want to do some adjustments to the firmware image later on and believe it or not we don't have to go into retroarch to make these changes we can do it directly in botasera, there's kind of a hierarchy when it comes to changing these settings so let me show you the top one first which is going to affect the entire system if you go into the main menu and then game settings here you can find different options that are already tweaked i wouldn't recommend messing with any of these, but for example if you wanted to turn off auto save and load for every system across the board you can turn that off here, but if you want to change it by console instead of the entire system here you can go into the per system advance configuration and then select a system and then make those same changes here for example if i turn off auto save load here for game boy that means it's only gonna turn off for all the game boy games and on top of that you can also do it on a game by game basis for example if we wanted to only make changes to castlevania, too without making any sort of adjustments to the entire system or all the other game boy games you can do that as well what you're gonna do here is hover over the game then press the select button and then select advanced game options and so now it's going to show you all those same options but specific to this one game in particular so this is where we could turn off auto save load for one game or you could adjust the aspect ratio things like that but yeah that's how you changed the settings for the entire device or for a specific system in particular or for just one game at a time alright, everyone that's really about it for this video i just wanted to show off this new sd card image that's available to you so just go ahead and download it and flash it into your new sd card and you should be good to go and so like i said said before i don't expect this to be a long lasting firmware image card right now we have a couple different people working on custom firmware for this device on the linux operating system in particular so i think in the coming weeks and months we're gonna have much better software solutions but in the meantime i wanted to make sure we all have the best experience possible, while we wait now this linux operating system is really only one of two operating systems available for this device and so i plan on doing a different video for the android operating system later on down the line, but for now at least i feel good knowing that the linux operating system is good to go at this point i think when it comes to classic gameplay and having a nice user experience the linux operating system is actually better than the android side and so because of that my recommendation is to use this side for retro gaming and then try to use the android side to push the device to its limits anyway, i'm gonna go ahead and wrap up things here but let me know if you have any questions in the comments below and be sure to like and subscribe if you found this helpful and we will see you next time happy gaming。

好,今天我们来说一下这个呃, gkd miniplus 这个游戏的一些基本设置,然后需要游戏副卡的朋友可以去咸鱼关注我的呃,于小铺就是跟呃抖音的名称同 同名,就是开元的设置,可以到这里来联系我啊。我们继续说这个 ggkd miniplus 这个机器,呃,基本界面跟以前是差不多,然后呢?呃,有模拟器,首先多出了,呃, psp n n d s, 在早期的是多出这两一块,然后在接机方面最大的亮点就是 p g m 二跟纳诺米,然后在 那个家用机里面呢,是多出了土星人六十四,然后还有一个就是 d c, 然后剩下还有多了是一些安卓游戏,比如说最有名的就是分者神龟嘛。好 好,首先我们随便先开一个,呃, 好,我们就开一个红陀螺啊,基本的基本的玩法跟以前一样,但是区别呢 就是一些菜单,可能他的菜单基本上按这个键应该燃放好一些,快捷键你看到吗?他已经在这里写出了。 好,然后基本设置里边呢,就是呃,我们现在比如说呃 连积木设置,暂时目前还可能那个他的还没有做优化,以后优化了我们会再说。一般情况就是媒体设置,然后遮罩,遮罩是可以自己呢,他有些特别的遮罩可按左右可以切换 屏幕比例呢,一般情况下我们推荐是使用全屏缩放,当然也可以等比缩放个人,个人取消。呃,个人需求吧。然后缩放算法吗?一般是双线性差值,这个是比较接近这个像素点的, 然后这是就是比如说液晶啊的颗粒质感的一些滤镜吧,就最后一个滤镜要注意他这个是非常次性的,就是一般情况下就是 比如说 f c 这种 m d 这种文物,没有什么单位大型模拟器的话尽量不要用,我们就设置五好了。然后设置呢,它这里比如说有连发设置,它是可以设置连发数字速度的,你比如说我们现在,嗯,发布器就是我们把这两个键设成这两个键的,连发 好可以了。手柄按键是这个就不用说了,这个就是设置按键,对应的什么按键方向,红色键,这个都不需要。这个摇杆类型呢,就是这个东西决定他是决定什么模拟,比如摇杆,就比如说 ps 一些游戏和 dc 的一些游戏方向键就是模拟这一块, 这个东西都不要去设置震动,可以打开飞机模式,因为我们现在不是飞机模式,就不需要好 好 p p 上就是可以玩了, 然后看到吗?按住这个 f 二进行一些切换,上下左右其实都可以, 然后这个样子应该是加载滤镜吧,大家可以到时候可以自己试吗?根据这个菜单吧,可以自己来选择 啊,加二三加速什么的都可以,如果这个机器你没有接下巴的话,接下巴啊啊三,就是啊啊 l 三个啊三是按这个样是对应的是这两个键, l 三个 r 三这两个键就是一些快件,如果找不到的话,你就可以在这里找啊,然后退出的时候个人建议是退出并自动删 自动存档,这个因为什么情况呢?因为这个自动存档有时候会有一些 bug, 会导致你再次进入游戏呢,会出现错误,那么这种是比较安全的, 你真的需要就是计时存档的话,个人是建议在这里保存,进行保存跟加载,这里是比较安全一点。好,基本的就说到这里。

哈喽,大家好。呃,这里是仙草电玩,呃,今天给大家讲一下我们怎么就是把那个机器的语言设置成呃中文, 呃,首先的话,因为他出场的话是默认是英文的,然后我们需要给他改一下。呃,首先的话我们机器开机之后,开机之后我们会进入这个画面,哈,就是各个模拟器的那个画面,然后首先我们按时啊, 然后找到我们的,呃系统设置,系统设置就是我们的,呃倒数第二个, 倒数第二个,然后第三行,第三行就是语言的意思,然后我们按 a 键进入,可以找 往下拉,一直往下拉,然后改成简体中文,然后就可以了,按 b 键返回,他这个提示的意思是说我们要重新开机之后,然后才会显示中文, 然后我们可以直接长按这个关机,长按开机键关机, 然后再开机, 然后等它开机完之后就是中文了,然后这个教程就是这样的,大家如果有对这款掌机感兴趣的话,可以在抖音下方给我留言。

注意看如何设置模拟器的路径, 比如这个 doors 模拟器,选中框,选中它,然后点击 select, 然后有一个编辑 选择模拟器路径, 这里就可以进去选。 比如选中这个 dose 里面的 games start, 然后就变成这样了, 我们退出一下,比如现在再按必建 退出,他会提醒你是否保存更改选择是 他就设置成功了。

大部分的百分之八十的,而不都说百分之八十的, psp 游戏可以流畅运行是没有问题的。首先我们来看一下这个呃游戏设置,我们这边呃看一下 跳针的话,这边选择自动,然后最高跳两针,就是如果你画面流畅的话,这如如果不吃性能他是不会跳针,然后如果他吃性能的话,他就会自动跳针。然后我们这边可以选择一个后期着色处理器,然后选择这个,呃这个 s s l a s s a。 然后这个的话这个滤镜,呃对于很多一倍一倍分辨率玩 p s p 游戏会有很多抗拒尺的游戏来说,开启这个的话就是会直接把抗呃直接开启抗拒尺。然后 下面我们来看一下这边我们把纹力缩放方式改成混合加双三四, 然后这边我们纹理过滤方式改成线性过滤,然后 ok, 好,我们这样设置完以后,我们来看几款游戏。 look look, 这个话很多女生喜欢玩的这个 look look 啊啊, 可以看到他是六十,是非常稳定的, 而且他画面表示表现也非常好,他是六十帧,六十帧,然后非常流畅,然后画面也很好, 相比 psp 那种就是满屏都是狗牙的话,那种画面就很好。 然后我们来看一下这个假面骑士超巅峰英雄, 也是非常流畅的,然后你可以看画面,这个非常精细。呃呃, psp 原版的话,这边的这个线条,这个斜线,他是全都是锯齿,全都是锯齿,然后用了我这套设置以后,他是不存在锯齿的,就是看着非常柔和,这画面非常漂亮, 那可能是因为录制的原因,会有一些波纹,但是你肉眼实际看的话,这个画面表现非常好,而且这个增速是没有没有任何波动的,一直是稳定三十分, 我愿意。 哎呀 呦, 而且有些场景的话, p s p 原机,呃, p s p 原机上面都是,呃, p s p 原机上面都是会吊针的,然后用阿基三五幺 p, 用了这条配置以后,他可以非常流畅,稳定三十。 然后我们来看下这个寄生前夜第三次生日, 也是稳定三十人,非常流畅, 哎呀, 然后这个怪物出现的话,这里也是没有没有什么波动的, 依旧是三十人,非常流畅,我们来看下一款游戏。好的,我我来给大家介绍一下这个奥特曼格斗净化零,呃,在呃,在我这套设置下面也是可以非常流畅的做的,我们来看一下。 呃,你别看他增速只有四十五十多,但是他画面非常的热议,画面非常好,而且而且他是很流畅的,不卡的。 呀呀 呀呀呀呀 啊啊 一呀啊, 那么好的,今天的话我就呃这期视频就介绍到这里,然后下期视频的话我们来,呃,我会来跟大家介绍更多的 psp 的一个游戏设置。

哈喽,朋友们大家好,我是小杨。当看到这张 psp 游戏山脊赛车的截屏,聪明如你应该能发现三个问题,一、屏幕上有虚拟触摸按键。二、画面被拉高变形了, 这从右下角的椭圆形的时速表上就能看出。三、右上角的帧数不足。四,画面有些些锯齿。这四个问题啊,也是玩家最常见的关于 pst 模拟器的问题,下面小杨就一一进行说明好。进入游戏后,按返回键呼出菜单, 进入右边的设置,左边的控制设置,在这里有一个屏幕虚拟按键,它是一个打勾的状态,如果你把它删掉这个对勾的话,那么再返回游戏就没有虚拟按键的显示了。第二个问题,画面拉伸的问题,还是游戏里呼出菜单,然后再 在右边这里第四行有一个屏幕布局和滤镜,如果进来的话,会发现右上角这有一个拉伸选项是打对勾的,如果你把它去掉的话,那么再回到游戏比例就会变成正常的十六比九了。 好,那既然说到画面显示问题,小杨就再多说一下 psp 画面显示的另外一种方式,那就是还是呼出菜单,然后还是这个屏幕布局和滤镜。在下面这里有一个调整大小,如果选中他的话,你再用手指往上滑画面,他就可以 等比的缩放。这种方式呢,虽然会裁剪掉画面两侧的一部分图像,但是呢,却能在不失比例的情况下放大画面。 在一些两侧显示内容不太重要的游戏中,可以选择这种方式。但如果是铁拳六这种格斗游戏呢,因为他的人物都比较居中,如果选择这种等比放大的方式 看,切掉两边的一部分, 它还是完全可以正常游戏的。另外呢, p s p 模拟器在还是这个屏幕布局和滤镜左上角这个加号,它可以添加一些复古的滤镜, 在这里有扫描线、卡通渲染和复古滤镜等等,小杨呢,就不一一演示了。好。第三个问题,帧数不足,勾出菜单进入设置,大家看这里跳针为一,我们需要把跳针关闭, 因为这个模拟器啊,有一个特点,当这个游戏不需要跳帧的时候,你选择跳帧,他反而会变得卡顿了,现在帧数恢复了六十帧每秒。问题四,画面 锯齿的问题,你呢需要还是进入菜单在设置里,在第二行渲染分辨率把这里呢改成二倍, psp 这会再退到屏幕就会发现呢,画面要细腻很多了。 那么这里是不是越高越好呢?其实并不是,这要看你的设备屏幕解析度。众所周知, psp 的解析度呢,是纵列二百七十二线,二倍呢就是二百七十二乘二等于五百四十四线,那么 rg 四五零 v 的屏幕纵列呢,是四百八十线, 所以二倍呢是基本契合的,其实还差一点,所以你设定更高的解析度的话,除了增加 c p u 复合而更费电之外,没有任何的好处。最后再补充一点,怎么启用右边的摇杆,因为大家知道 p s p 由于没有右摇杆的缺陷,所以在玩例如怪物猎人这样的游戏的时候呢, 左手的拇指就会同时负责跑动与视角,很不方便。例如这样左手既需要跑动,又需要用十字键去切换视角,这样很不方便,所以呢,你可以在菜单的这里扣出菜单,设置控制设置按键映射往下找 这块有右摇杆的,上下左右按一下加号,右摇杆上下 好,映射好之后再退回游戏。你发现右摇杆就可以负责视角,左边的摇杆呢,可以负责跑动的方向了,这样再战斗起来就会特别的得心应手了。 好,那今天的教学就到这里,大家还有什么别的想看的教学或者问题可以留言,朋友们再见!

rg 三五叉叉绝对是目前性价比最高的掌机之一,绝对不是掐饭,我只是用了这么长时间以来真的有感而发,某多多上用券目前两百三两百四就可以入手, 贵一点也就是两百五六,小巧复古的外形加上还不错的手感,三点五寸全贴合的 ips 屏幕和导电胶按键,让我也是爱不释手。 升级了最新的大蒜系统,简直完美,之前很多人包括我都在吐槽他的臂圆系统,而现在却是该有的全都有了,像金手指加速功能,回速功能,而且呢,我摆脱了一个怪圈,终于用开元掌机认认真真的开始玩游戏啊, 而不是玩机器。在这部掌机上,我通关了 gba 恶魔城三部曲,目前光明置换二也快玩通了,他虽然还有多多少少的不足,但在我心目中,他确实是一台性价比的代表。 今天主要就是做一个关于 rg 三五叉叉如何升级大蒜系统以及要注意的一些细节点。 可以看到,在升级了最新的一点四四版本以后,大蒜系统的可玩性真的又大大增加。首先电量显示更加准确,并且呢,又新增了很多主题与皮肤,我们还是先换一个我比较喜欢的主题与皮肤, 这个是换里面的图标,然后呢,上面还可以换你喜欢的主题, 功能也是越来越好用,精准简单。下面废话不多说,我们直接一起来看一下如何安装以及一些要注意的细节。 首先推荐各位加入 r g 三五叉叉的官方群,群号我会发在简介与置顶评论中, 我们下载好置顶评论的连接云盘,连接一点四点四魔改版大蒜,然后呢,我会将这个大蒜的最新版本的说明复制到 txt 文件夹里, 各位在安装前先看看这个说明即可。 我们插上 u 盘,打开有两个文件夹,分别是 m 开头的以及 roms, 如果呢,你是新卡就请用一点四点四刷卡镜像包,我们将镜像拖到文件夹以后,打开文件夹内的我提供的这个软件,这是群内大神发布的二合一 刷卡格式化二合一这个软件呢,只需要将镜像拖进去,新卡就可以格式化成系统盘,但是 他会将 rooms 的文件区分的较小,需要在我的电脑里面管理的磁盘设置里面更改一下比较麻烦,所以推荐各位用覆盖安装包。覆盖安装包也比较 简单,只需要将里面的这两个文件夹 m 开头以及肉木斯覆盖即可。首先将 misc 文件的所有文件拖到我们 tf 卡的 misc 文件内覆盖即可,如果 提示空间不足,将最后一个 u 开头的文件删除即可拖入。接下来我们再将若木斯文件夹覆盖到我们 tf 卡的文件夹即可。 在装好以后呢,第一次开机会有一个加载释放资源的过程,大概一两分钟,不会很长。安装好以后呢,就是一点四点四最新版本,我之前一直停留在一点三点四啊,觉得那个版本可以养老,但是他新功能确实越来越多,越来 越丰富,也越来越好用。后面呢,我还会补充一个一些常遇到的一些 bug 以及小问题,细节问题各位一定要耐心看完,不然在游玩的过程中会出现各种问题啊,我们先看一下最新版本,确实是增加了很多功能,比如说是各种 模拟器的遮罩,像 gba 的话,本身原本是这样的画面啊,然后如果有了遮罩以后呢, 可以看到上下加了两条黑边,但是马赛克像素颗粒一下就出来了,而且还是一如既往的方便,秒进游戏秒退游戏,关机以后依然如此啊。 这个 r a 的自动记录非常的好实用啊,随时进入从你上次的地方开始玩,即使 是 ps 一游戏也是一样, 这是 g b c 的遮罩。下面我们来讲一下细节方面要注意的点。 首先所有的游戏呢,是放在根目录下,有一个 rooms 文件, 点开以后呢,里面就是所有的游戏,不同的 app 对应了不同的文件夹名啊,像 ps 一游戏就是在 ps 的文件夹 sfc 以及还有 gba fcgba 就是在 gba 文件夹里,点开以后呢,可以看到 所有游戏是解压缩好以后的 g b a 文件。预览图呢是在这个 m i m g s 这个文件夹里,点开以后可以看到它和官方原本的预览 图是不一样的。大蒜系统支持的是 p n g 格式的,而官方的预览图是 g 开头的那个格式啊,如果你嫌麻烦的话,可以直接把官方的那些 预览图后缀名直接改成 p n g 也是一样支持的,只不过可能他的那个图形大小有点不对啊,但是一样也能支持也能用。 还有一个点呢,就是很多玩家在切换到官方系统,不会再切换回来我放的这张图, 根据这个图来做就可以切换回大蒜系统,遇到什么问题也可以随时问我,关注我,带你了解更多涨机与游戏。感谢您的收看,我是小时,再见!