注目, f 八连接杠八推子开机画面, 然后台子需要单独供电,跟录音机一样都是单独供电,供电之后台子开机,灯亮之后 bt 电源开启之后,然后菜单 usb 选项打开 f r c 杠八确定 好,这回就连接上了,他红灯起了,这回开轨道。喂喂喂, 二三四五六关踩单键 a 关闭录制停止, 关闭的时候就不用关台子,直接关录音机台自动关闭,但是每次开机他都要识别一下台子。
粉丝429获赞1608

as of the time of this recording all of the f series, the f4 fad and the fadn all have the automix feature that is to say it actually, automatically mixes when you have multiple people speaking into multiple microphones, so what that does in practical terms it was actually fade back the person who's not currently speaking so that their microphone isn't picking up a lot of room sound and contributing that to the overall recording really nice feature the only problem with this auto mix feature is that for my perspective there are no settings you can either turn it on or off and it doesn't it doesn't work very aggressively, so the good thing about that is that it doesn't usually cut anyone off and when they are speaking the problem with it is it doesn't attenuate their microphones very much, so it's not really helping the overall mix, as much as i'd like it'd be really cool if soon at some point could add some settings to allow you to kind of tweak coogressive that automix works you have both balanced and unbalanced outputs on these, which is really nice on the f8 and the fadn the screen is really top notch it's bright, it's colorful it can also be seen outdoors in the bright sunlight works great on the f4, it's much lower resolution, it's monochrome and it can still be viewed outdoors in the sun which is good, but they can't fit as much information on the screen so i find that a little bit limiting in some ways, it's not a huge deal, i still likely a four, but it is a consideration。

you have dual sd card slots on both the f4 and the f8, which is really nice there is the f control add on mixing surface so this is a really nice control surface that allows you if you're working from a desk or a table to have a little bit more control with controls that aren't quite so cramp together on a tiny little front so that makes it a little easier if you are for example not operating from a bag, a sound bag, but instead have the recorder on a table or desk, and are recording something like a concert or perhaps a panel discussion both the f four and the f eight and f a n have in built time code generators and they're very high quality time code generators that you can rely on through the course of an entire production day that is to say twelve hours and you should still be in very good sync if you're not familiar with time code i've got a variety of different videos we'll link to those as well now there is a mobile app to control the mixer for the fa and the fadn the f4 does not have that option and the app is for ios it is not for android so that's kind of a sticking point for some people, but i just wanted to lay that out here。

今天我们来测试一下我们的录音机在关闭 n 小时以后,跟石马器有没有差真的情况。然后现在我们把石马器跟录音机做一下同步, 现在内部和外部的时间码已经一样了,这时候我们把录音机关闭,我们测试的是 f 八录音机, 好,石马器就让他一直跑着,咱们下午再继续测试他们是否仍然同步。 好家伙,差了将近一秒。由此可见,虽然石马器一直在工作,但是录音机如果 关机的话,经过两个半小时的时间重新打开录音机,这时候两台机器的时间码已经差了将近一秒的时间,所以我们片场如果关闭过录音机的时候,一定要记得重新对码。 接下来我们再测试一下,不关录音机,也不关石马器。嗯,再过几个小时,我们观察。 经过将近三个小时的等待,我们再看一下石马器上的时间和录音机上的时间,拍一下照片, 从这个结果我们可以看到,三个小时以后,石马器和录音机的时间码差开了一帧。三个小时差一帧差了点, 问题不算太大,但是并不是特别理想,所以如果有更高的要求,那么你的录音机上也要挂上十码起。

好多人问注目 f 八 n, 就是基本上注目 f 八系列整体都会有一个通用的那个问题,就是按键 不灵敏,时间久了他的由于他的自然磨损,他的按键进灰尘还有碳 地方都有磨损,他自然损耗就会出现什么问题,就是按键不灵敏或者是长时间按, 总体来说就是使用的问题吧。然后换了之后,哎,正常现象,录制关闭,播放 停止,下一上一条上一条上一条,上一条下一条下一条这类体现下一条,哎,关机 真来说就是需要换一个软件盘,把软件盘换掉之后就完全可以使用了, 因为他是胶皮,上面刷了一层碳,通过碳来连接,他肯定接触时间久有磨损,就跟咱那个游戏机手柄 是一个道理, 录制停止, ok。

hey, everyone, this is jon from zoom and i'm here with market tech at aes and i'd like to show you guys our new faden this is a follow up to our very popular f eight it's a portable mixer and recorder has built in timecode generator and it's perfect for any sort of field audio recording preferably to go with film due to its timecode capability so compared to the fate, we've made some hardware improvements on the faten, the inputs are now switchable between mic level and line level for both quarter, inch and xlr the outputs are now switchable between pro and consumer line level and the battery sled has been redesigned slightly the input voltage for the heroc input has been expanded up to eighteen volts and it can now bus power the frcate controller which was previously only available on the f four so compared to the fate with the faten, we've definitely addressed some of the concerns of our very professional users who really want a well oiled machine that they don't need too many adapters for things like that so for those interested in the f a n, it's available now on marker tech and thanks for stopping by。