马赫三零 一二三,非常完美的奔驰车,目前大家看到的是 二零二四款 pse 的马赫三零,这款是一个 ecr, 一个轮主,我们通过以上这款功能调节三轴都给他调好了,呃,也同样过了百指二十五英寸的拉距, 他的磅数官方是满磅是六十,但是工友要求调到四十五,按照官方他可以松十圈,目前松七圈的状 看一下,他达到了一个四数磅,所以因此在一圈的大概的磅数区间在一点八磅到一点九磅,所以说买磅六十磅,他 的极限的安全是可以调到四十磅的,七十磅可以调到五十磅,这就是个磅数,给大家进行一个参考,跟大家进行一个回馈。这款工的拉杆怎么样?我们来 再来给大家亲身的感受一下这套轮毂,它是 e c r 轮毂,跟之前的不管说探寻飞好还是一个马赫三四一八,其实拉杆都是差不多的好,我们来看一下台用的是一个 q i d 的 m 叉燕尾,这个 描的话用上特菲尼吉的一个单针描,美国专家的亏孔,加上一个二号沉浸器,皖神用的 logo 的皖神以及他的火球的 平衡感特别的容易啊,因为他只有四十五磅,停止点非常的清晰, 看一下它的震动,特别的安静啊,那特别容易的, 非常的安静,所以说加装一些配件跟你不加装配件的感受啊,还是比较明显, 特别的安静,后墙也是比较的舒服的,这就是 p s e 的马赫, 它的拉杆还仍然保持跟之前的碳悬浮。马赫三四的拉杆是一样的,即便说是一二轮组的拉杆稍微偏硬一点,但是不是那么太明显,而且这款是他的一个低速轮组的 ecr 的一个轮组,所以说拉杆还是比较的柔顺的, 停止点也是比较的清晰。至于他震动感,目前至少是这款四十五磅拉开的感受啊,给我掌心的回馈是特别的安静的,有可能他加装一些像减震杆或者瞄具的这些加装上去啊,显得他这款工的确的比较的安静, 震动感也是非常小,我也试过马赫三在二十九英寸拿去,但是不装任何的配件情况下,的确在六十磅震动感,对于霍伊特稍微定那么一点点,我们就下系统 啊,有条件的我们再用灰特二叉杠八跟这款大点拉去大点磅数,再感受一下它整体的震动感,但是灰特的确要比他稍微优优那么一点点,这也是很多工友得到一个回馈啊,至少我从这款弓感受,这款弓实测四十五磅, 二十五英寸拉距已经非常安静了。 t s 一的马克在目前碳工市场上整体的外观呢,做工还是非常精致的, 而外观上面也是在所有的碳工中他做的,最近这比灰特博泰克、伊利特这品牌做工更加的细致点,至少从这款黑色上面我能够看到 tse 的确在 探工上面细节方面做的挺满的。这期老鹰就针对对这款工的评测就说到这里,有时间的话在于灰特阿叉杠 八进一个对比,看看各有哪些优点吧。所以说选择 pse 的工友很多都是把外观放在第一位,其实就是一个轻便,整体的性能还是比较的 是大家接受的,而且三零轴距中规中矩的一个大小,这一期跟大家说到这里,谢谢大家的收看。
粉丝1805获赞8050

大家好,我是林公色老鹰,目前大家看到的这款迷彩色来自于灰特二零二四款具有代表性一款旗舰工灰特的阿叉杠八。看一下整体的配件给大家简单说一下 上端呢,加了一个分体的快拆件盒,同样他分为这款分体的还有那种短款一体的以及长款一体的,快拆的 长款呢更加的贵一些。我们来看一下这款皮卡丁力导轨,也是延续好几代了,这款是一个单针的,去年推出了一个双针的,也有五针的,七针可选。下边这 m 叉的 燕尾跌落电台,这是霍伊特跟 qit 联名的一款,为了衬托这款迷彩色的弓,搭配这个款拉绳的跟这个低环的拉绳 来对应。同样大家看到的这款霍伊特的这款碳杆的一个减震杆跟公孙也是融为一体,大家特别关注的就是这款管绳的也是防脱绳,如果说你不加这个减震杆,可以有一个固定螺丝你进行固定,这个防脱绳也是霍伊特的, 大家看一下他不像一般的碗绳,他会自由的下垂,这个的话立体感特别的足。大家看一下下端呢,在经典的公身上,他可以加装全新的二代的八支架, 配合他的一个短杆的减震来进行使用,同样有一共有需求的他会加一些单边微坐看下,单边微坐配合这款减震杆来进行使用。工片上面老鹰加装了 a 训的一个工片减震,因为霍伊特在今年他取消了 这个吊舱以及这款工片减震,所以老鹰特意加了一款 agent 的这款工片减震。 主弦上我们看一下他有两个自带的一个弓弦减震啊,大家说这是啥?他就是一个弓弦减震,类似于马修斯的胡尾巴减震,他有一个缺点,因为他的这一块长长的,可能后期打档他会掉,为啥? 因为它夹在弦的中间,如果说你的磅数大的情况下,勒的比较紧,很容易把它夹断,如果说后期断了,大家可以购买一个猴尾巴减震,放在这个地方,即便你不夹的话,对公公的本身影响并不太大,没什么影响。那看一下这个亏孔选用的一个 这款美国专家的一个帽檐亏空,他也是一个迷彩色,也是很难得的,同样亏空里面加装一个沉浸器,配合 他的放大倍镜的一个使用,这就是以上的一个基本的一个配置的好。我们来说一下这款弓的基本的一个参数,裸弓三十英寸,弓档六英寸,拉距二十五到三零,磅数四十磅,八十磅,最小是满磅四十磅, 满磅八十磅,或者说满磅七十磅,他的极限范围段正常不会不建议大家超过十五磅,如果说石山拉不动的情况下,在十五磅可以略微的松个一圈,正常在五十二磅,这样大家可以通过 侧面螺丝孔可以看到,正常的他已经已经在孔的一半了,所以说正常不要低于五十二磅以下了。省力比百分之七十五,百分之八十,百分之八十五的省力比裸工的重量达到了四磅,今年的确比去年的更稍微重了一点。重点呢,看一下 这款钟,它对于去年的 r 叉杠七九了还有变化,最主要的就是它的一个轮主了,这款轮主在原来的 h b 叉的 pro 版的基础上进行升级,变成了 h b 叉的叉 i c t 的轮滑系统,这个轮主的最佳优点类似于 灰特的平流程 bt 轮来的轮滑系统,更加的精细化,一个拉距了,它的拉距可以分为三个轮组模块,一个是二十五到二十六,另外一个就是二十六点二五到二十八, 三号轮主就是二十八点二五到三零,这个拉锯更加精细化,但是对于一些小拉锯的 工友的不是什么太友好了,假如说我是二十六拉锯的,希望你只能选择二十五到二十六了啊,当然了,常规的在国内正常都是二十六点二五到二十八的,这中间的轮轴拉锯啊, 非常的多。双停止点是什么意思?就是它有一个 h 跟一个叉 h, 它可以自由的上下对调,就是这个轮主停止点的话,变化 对你我们设计的过程中影响并不太大。在这点今年会议他在轮主模块上做了一个小心思,他取消了调查减震以及公平减震,同样他能保证比去年的阿叉更七的震动感更加的 小,官方可以有一些测试,大家可以看一下。好,我们来感受一下这款全新的二零二四款灰特大阿叉杠八,因为目前是五十五磅,其实我拉开还是比较的容易的, 非常的干脆, 震动感的确是非常非常小硬, 非常的安静,所以说印证的会议特官网,哎呀,他的确在今年做的震动了就比往年要降低很多, 不是因为目前老鹰加了一个弓片减震,的确在之前没有加装之前也调试几款弓,的确震动感上对于二叉更七来说有一定的一个 提升。好,这就是目前大家看到的威特阿叉杠八的一款非常漂亮的一款中速迷彩一期的抖音就给大家说到这里,谢谢大家的收看。


目前大家看到的就是来自于辉特阿叉杠八的高级配,整体的配置大家看一下辉特一体的快拆件和兰德的火球的单针苗,十英寸的黑色的减震感, 灰特原装的碗绳,装了灰特原装的一个碳杆的八支架, 以及单边微座,加上一个六英寸的侧杆。弓片减震加上一个 a 圈的弓片,减震 前的状态,他的重量是七点阿斯棒,换上斤的话大概是六点五斤。我们来感受一下这位土豪大哥配的这款辉特的豪华套,我们来看一下目前 的实测拉距是二十八英寸,磅数仍然是五十磅, 非常安静,特别是加主感跟单边微度的加持,肌肤一点感受不到那种余震。 来自于霍伊特的 r 叉钢板。

大家好,我是零公色老鹰,这一期我们跟大家说一下关于霍伊特二十二杠八如何选择一些配件,因为很多工友啊,看到很多以套装的形式,我们这一期跟大家深入的去探讨一下,但是前提跟大家一个提醒, 配件往往价格要比整体的工要价格要贵很多,所以说啊,根据自己的实际情况选择自己合适的配件,量力而行。 目前大家看到的就是这位工友所配的一些配件,供大家均参考。好,我们来说一下这款工,这款是霍伊特的顶级碳工阿莎杠八, 所以拥有它匹配的建材,匹配的新款的二点零版本的威特与 p i d 联名的二代跌落键 配孔,我们给他选用的专家的配孔音器配到菜丝的镜片,因为这位工友他选择的是一款单针秒,所以说他需要加装一个倍镜,选择菜丝镜片,同样我们来说一下秒,这个是一个单针秒,但他同样对应的有双针针, 甚至有气质,所以说光火球这个品牌他有多快,这是皮卡的,甚至还有碳杆的,还有等等的一系列的品牌精选的,就根据自己实用的场景所需要对应的柔韧减震感啊,共有选择是十英寸的 长杆跟六寸的短杆,单边没做要加配的一体的宽带键和还有额外的腰带上系的一个近乎甚至下端 需要加装一个二点零版本的新款,以及威特立体比较强的一个防脱绳, 因为新款呢,它取消的工片减震,所以共有加装一个 hn 的工片减震,当然键制的啊,也有高端的,我们给大家看一下斯顿的背甲键,这是普通版本的, 这个是 pro 版本的,同样这个盒装也是 pro 版,所以说懂得其实价格挺高,搭配的工箱用的传奇的四米的工箱用的撒方器,也是目前主流的 火球刀锋 pro, 这就是大家看到的豪华配置,还是老鹰,还是那句话,根据自己的实际情况量力而行,一步到位,的确能省一些相应的费用, 但是根据自己的实际情况进行选择。好,这一期跟大家说到这里,谢谢大家的收看。

非常正,满磅是七十磅,应公共的要求调制磅数尽量低一点,是目前是五十一点八磅啊,接近五十二磅, 二十七点五英寸的蜡距。目前大家看到上面的配置表,我们用的是难得的皮卡五针秒, 以及加了一个 a 勋的宫廷减震键台,搭的仍然是辉特跟 qit 联名的燕尾 m 叉跌入键盘,同样我们用两款键,一款是伊斯顿的直扯,大概是四百七十格零的 艺术中的背甲剑,另一款就是这款马克西姆的迷彩剑四百格力,我们来感受一下这款弓的实际剑术表现, 目前我们的用换四百个 linu。 以上的件数吧,仅供大家去参考。好,我们来说一下这款狗,之前已经给大家介绍过了 辉特这款员工的整体的大概的一个数据,因为在今年他主要是在于他的轮做了一个叉, sht 的轮滑系统最大的特点就是拉距更加的精细化了,别的话没有特别突出的一点 好,整体的工型跟之前的阿叉杠七非常的详细,这款旗舰工也只有三零轴距。好,我们来感受一下这款来自于辉特的阿叉杠八。我们这一期啊记录这个视频,再来感受一下这款工的一个 操作体验,实测接近是五十,阿坝停止点非常清晰,看一下 非常的干脆,震动感也是非常小,特别的安静,我们来试一下另外一款键, 真正需要共有十几千支的操作体验,感受一下威克阿叉康巴的的魅力。好,这一期呢,我们就给大家演示到这里,谢谢大家的收看。

hey, folks as usual hoyt offers aluminum and carbon bows every year and usually they've been two very different shooting experiences hoyt's been working to get them closer and closer together and i think this year it's the closest they've ever been hey everybody this is pj riley from lancaster archery chile november day we are out here to tell you about flagship hunting bose from hoyt for 2024, i am holding the rx 8 and right here i've got the alpha x 30 there's also an alpha x 33 i've got the alpha x 30 two great new bows from hoyt this year where they have done a lot i got to give hoyt credit they have been working towards improving that shooting experience chipping away chipping away every year to my taste they've gotten a little bit better and a little bit better and usually what we see is that there's a carbon experience and an aluminum experience and they're too very different but hoyt this year is they're saying they've got two flagship bows but one shooting experience they just want you to pick and i think they've gotten about as close as they've ever been to having a carbon bow and an aluminum bow shoot very similar to each other we'll tell you all about that in a second here but first let's get the specs for the rx 8 and the alpha x 30 the hoyt carbon rx 8 measures 30 and 9 16's inches axle to axle it's gonna weigh four pounds have an ibo speed rating of 342 feet per second with a brace height of six and one eighths inches you're gonna have three different modules with a total draw length adjustment range from 25 inches up to 30 inches it's gonna be available in peak draw weights of 50, 60, 65, 70 and 80 pounds the hoyt alpha x30 measures 30 and 38 inches axle to axle it's gonna weigh four point five five pounds ibo speed rating of 344 feet per second brace, height of six and three sixteenths inches it's gonna have three different modules with a total draw length range of 25 inches to 30 inches and it's gonna be available in peak draw weights of 50, 60, 65, 70 and 80 pounds oh, that was another one all right so the rx8 obviously is the carbon the alpha x30 that is the aluminum version first, we're going to talk about similarities because again what hoyt wanted to do was build two very similar bows, a lot of the same technologies everything i'm going to talk about is going to be the exact same technologies starting here with a new cam, we have hbx exact cam and hoyt calls this their most customizable cam that they've ever had and it's got a lot of cool features in it so first off for draw length you're gonna have the rotating module here and what they've done is in the past if you're familiar with heights they used to have different cam sizes and then adjustment ranges within there, however, what they've gone to is having one cam, but now different modules and what they want to do is they want to get peak performance out of all the different draw links and if you just have one rotating mod, you know that goes from twenty five to thirty inches you're going to have some winners and losers in there so hoyt wants to minimize that so they've come up with three modules so right here i have the number three module so this one is adjustable from 28 and 1 quarter inches up to 30 inches and it is adjustable in quarter inch increments that's a new feature for hoyt this year so why is that a big deal quarter inch draw length adjustments so a lot of times you know in the past it had been half inch and what would happen is you know 28 and a half and 29 neither of those feel exactly right you need to be somewhere in between so what you're going to do is you're going to twist up the cables to lengthen that to get to like 28 and 3 quarters so the engineers they don't want you doing that because then that changes the specs of the pose they want you to have the cables at the length that come from the factory so if you can now adjust by quarter inch increments now you've lessened if you do need to tweak things with cables it's minimal so quarter inch just allows you to really fine tune that draw length to get it exactly where you want it so on the modules here you're going to have your draw stop and you're going to notice now there are three different positions you've got 75, 80 and 85 that's the let off percentage of let off so you get to adjust it to where you want it you're also going to see an h and an h x and so those are two very different feelings for the draw stops and what you would do is you know if you have if you want the h position so that one is a real solid back wall feels like a limb stop basically the hx is a little bit a little bit softer not quite as hard as that and how you would achieve that is you're gonna swap them you're gonna take the top one move it to the bottom bottom one move it to the top now you've gone from h to h x again customizing it get it to where you feel about it and sticking with the cams it's the little details in bows that really mean a lot you're going to see this device right here so this has a little rubber pad on the top there and now i've got an attached bipod on here that we'll talk about in a second, but you can see right here this rubber pad so when i set this bow down what it's setting on is that rubber pad and you can imagine if you're lowering your bow from the tree stand down what's it going to hit it's going to hit that rubber pad first and not the cam something you know of small detail but for bowhunters that's a big detail that's gonna protect that cam great addition there by hoyt this year all right so the limbs we've got new limbs this year for the hoyt bose they're going to be wider and they're going to be shorter that wider stands there of course that just makes these things super stable at full draw really hold very nice when you're aiming there and of course the shorter that increases efficiencies while also allows them to cut some weight out so dual purpose there shorter wider limbs they just make for a better shooting experience oh that one was in there all right now coming down the bow of course you know streamlining that's the name of the game today and both hoights they will have a picatinny site mount if that's how you want to mount site of course they still have your standard threaded holes on the side for standard site mounting then they will have the machine dovetail if you want to use one of the integrate style rests there is that feature on there as well, i have one of the integrates on the alpha x30 here, but i've got a standard rest on the rx8 you can mount either one whichever one you want now coming down the bow, you are going to get two different stabilizer positions standard one directly under the grip and then this one way out in front which it is going to come with your short stop stabilizer that was something who introduced a couple years ago and this is a vibration dampener, but you can see so this is a 12 inch stabilizer i've got here and you can see where the short stop starts what that would allow you to do is to get the equipment that stabilization is you can use a much shorter stabilizer to get that same stabilizing effect that's why hoyt has this mounted down here and then of course as you can see i've got their new bipod mounted on the bow here which you can shoot with this on the bow, i didn't notice any detrimental effects with this on there and it's super handy for setting it down you know your ground blind hunter set this right down on the ground that's super handy to have that on there now for sidebars if you want amount of side rod on there hoyt does something a little bit different so on neither bow, are you gonna have a rear bushing like we typically see for mounting a bracket to get your side rod on hoyt has this attachment down here on the rx8 and they've got a position right there so they have what they call that sl sidebar mount that's what you're gonna use and it's just streamlined and you don't have to deal with one of those larger side rod mounts you know they can be bulky that definitely add weight the hoyt mount is much slimmer weighs a lot less that's how you're going to mount your side rod and on both bows we do have the vital point grip and this you can see slightly angled there it's going to give you a little bit of a higher wrist than perfectly vertical, nice and comfortable it is rubber cold day out here that thing feels good on your hand great flat spot on the back there for getting your hand index get that proper position when a grip what we want is to have it repeatable so you can find the same spot over and over again this is a very comfortable angle here that vital point grip so what hoyt is saying with the rx8 and the alpha x 30 is they wanted to have two flagship offerings, but they wanted to be your choice rather than two completely different bows they had basically all the same technologies what's different is the material this one's carbon that one's aluminum so you're just going to choose that experience from them and you know with them having a lot of the same technologies i felt a lot of the same performances however, what i will say today is that the rx 8 here i think this is the nicest shooting carbon bow that hoyt has put out you know i've shot them all this is the rx 8 i've shot them all going all the way back to the carbon matrix and i've talked about every year how they just keep getting a little bit better, a little bit better, a little bit better and so the rx8 first thing i noticed was the lack of handshock you know carbon has that thump aluminum is going to vibrate carbons going to have a thump that's just what you expect from carbon and with this rx8 it's almost gone there's hardly any feel to that and i just noticed this bow held nice it's shot nice the draw cycle on this hbx exact cam is killer nice and smooth i tried it on both of the let off positions you know the h and the hx both of them are comfortable real nice i probably prefer the h that real hard back wall there that's seemed to be what i like but they're both great shooting bows, but i just found that this rx8 man i really like the way this thing shoots so on the alpha x30 we should mention here that hoyt has completely redesigned the riser you can see that is not like any riser aluminum riser that we've seen from hoyt before different cutouts different bridges different design what the engineers have said was they were uh striving to eliminate noise and vibration which i think they've done both of these bows bows make hardly in many noise compared to that tractor that you hear in the background right there that is moving at a snail's pace, while we're trying to film here and he stopped right there and backed up all right so hoyt is making it difficult for you this year they built two bows with pretty much all the same technologies just different materials now it's up to you to choose the carbon rx8 or the aluminum alpha x30 so there are gonna be other length versions of these bows as i mentioned there will be an alpha x33 33 inches axle to axle and then there's gonna be an rx8 ultra that's just over 33 inches so those are two other options available as well, so there are other options these are the two that we had experience with if you want to see all of the offerings from hoyt this year be sure to click the link in the description below if you like this video give us thumbs up if you want to see more videos like it subscribe to our youtube channel don't forget to click that bell to get notifications wherever we put out new videos as always if you have any questions you can visit us at lancster archery com。

大家好,我是鑫源护发视频的大王,带你来射线,我是大王,感谢大家收看本期的一个视频的一个讲解啊,本期主要是讲一讲这个或者阿叉八的,还有这一个 alpha 的这个拉距的一个调节啊, 因为很多的还是新手朋友不太清楚啊,直接上手高弹弓,所以说我们一步一步给你们讲清楚啊,怎么去调这个拉距, 我们调这个拉锯的时候啊,一定要注意什么呢?我们的上轮跟下轮一定要调到相同的刻度啊,这个是原则,必须要调到相同的一个刻度。好,我们来看一下这个轮子的这个怎么去调, 首先我们要清楚的是什么呢?我们的这个工片上面有一排的标签,上面有不同的这个英文字母所代表的这个拉距的含义啊,这个我们要会看呃,大家的话可以参 参考一下我总结的,因为这上面只有大写的英文字母啊,模块上面有小写的,可能大家搞不懂啊,我总结了一份这一个拉距的调节参照表啊,大家可以看一下, 我们的话先自备一把这一个内梅花螺丝啊,这个叫 t 幺五规格的啊,用来调这个拉锯或者是这个省力笔啊,我们调拉锯的时候要注意哈,有三个螺丝,一个两个,三个啊,这三个螺丝是拉锯的一个螺丝, 剩下的一个的话,这一个是省力比的一个调节螺丝啊,我们目前的话先调拉距,调拉距前的话我们要先看清楚啊,这个箭头所代表的指向了这个刻度,一啊一的话,按照现在这个二号模块,在这个凹槽上面所代表的是三十的拉距 啊,目前我们要调到二十八点五,二十八点五的话就往下数,这个小写的一啊,呃,是指的二十九点七五,然后 f 是指的二十九点五啊,我们要调到二十八点五的话,那么我们要调到这个 h 的档位啊,大写的 h 啊, 来我们先把这个螺丝啊三个螺丝给他拧下来,这个拧螺丝的时候大家一定要注意啊,首先我们的这个一定要用七幺五的内梅花,不要用内六角的用内梅花,我们的话把这个扳手啊,这个 一定要对准了这个孔位之后最好是什么呢?用力向下压压的时候,然后逆时针去松这个螺丝啊,很多的工友的话操作不当会容易什么呢?造成了这个螺丝口划丝啊,大家一定要注意,先把这 好,我们把这个三颗螺丝都卸下来了之后啊,滑动这个模块对准的这个刻度啊,要对到什么呢?刚刚是默认的一档位啊,我们要对到这个 h 档位啊 h 档位,然后这个时候我们锁定这个三颗螺丝, 我们固定这个螺丝的这三个螺丝的时候啊,家里如果说有条件的话啊,我们的话给他那个上一个这个螺纹锁骨剂啊,呃,俗称的话就是螺丝胶,一定要,大家一定要注意什么呢?呃,中强度就够了,不要去买高强度的 三颗螺丝对着这个孔位给它锁进去啊,我们三颗螺丝给它锁完之后啊,这个代表一个轮子的拉锯调好了, 这个时候我们一定要注意另外一个轮子啊,一定要调同样的刻度啊,这个时间关系我就不演示另外一个轮子了。好,接下来我们来看一下这一个省力笔的调节啊,省力笔的这个调节很简单的啊,把这个螺丝给它旋松了之后, 把这个螺丝旋松了之后的话,给他拿下来之后的话,最默认的是百分之八十五的一个省力 b 档位啊,如果说我们调到百分之八十的话,可以打开看一下啊,这里有一二三三个孔 可以放到中间的这个孔位啊,就代表百分之八十的这个省力笔放到最里面的一个孔位档,这个时候锁上我们的这个螺丝就是百分之七十五的一个省力笔的一个档位啊。好,这期的话是一个拉距的一个讲解,因为很多的新手 还是不懂啊,所以说我们亲自来操作示范一遍。好,感谢大家,我是大王,有兴趣的可以点点我们的关注,下一期的视频更精彩 哦。对,忘记交代大家了啊,这个新手朋友们一定要注意啊,我们在打一段时间之后,定期检查这个模块螺丝的松紧度啊, 当然这个螺丝你不要拧到太紧了,拧到太紧了之后,你下次调拉锯的时候很容易给他拧滑丝啊,我们一定要检查这个螺丝的这个松紧度,松了的话给他紧紧一下,紧到什么呢?有这一个阻力力即可啊。