粉丝5355获赞2.2万


大家好,我是仓鼠,今天我带大家来看一下我们麦克斯的睿智小巨人,也就今天 pro 这一款的一个安装, 这个就是我们的一个爱设备接口,有的是在那个靠背和坐垫的缝隙里面,有的呢就是直接裸露出来的,有一个引导槽,这个是我们车座椅上的一个接口杆,握住这个以后拉出我们的接口杆非常轻松。好的,另外一端也是一样的, 然后我们的接口杆对准我们接口槽里面的接口环 推进去就 ok 了,非常简单。我们刚才安装了我们下面的两个接口杆以后,我们就找到他的上搭带,就拖布连接带,然后找到汽车靠背 背后的一个挂钩猫点的位置,然后直接挂上,挂上以后,然后我们再收紧这个上拉带,收紧这个皮带就就 ok 了, nice。


hi, this is heather from car seatblock we're going to take a look at the maxi, cosy coral xp and how to remove the cover to wash, it because it's a two part seat you have your inside carrier and you have your out outer carrier let's remove the inside carrier from the outer shell, so we'll take it and press that button to get the shell out and that's that okay, so we have our shell and let's go ahead and remove the cover so we'll just it's on with the elastic oh first, we have to remove our cross body handle, so we'll get that off okay and then we'll remove this cover because it's just it's an elasticized cover be careful with where the crossbody handle was on because we don't want to rip a hole there, it's not a sharp plastic here, but you know it's still one of those points where you can you can rip the cover? so we just want to be super careful there, so we'll just lift the cover up do the same with the bottom wayne yeah, you're right, it has the handles here okay, so we need to work with these handles yeah that throws came into the plan so i'll just put this back, so we have to figure out how to get the handles off don't we okay, so up at the head area where the words max cozy are is where the handles disassemble, so we're gonna take these fabric handles and on each side we're going to grab one into time obviously, so take a handle and because it's got a little bit of elastic to a little bit of give we're gonna pull this through like this give yourself some slack and that it's on a metal slide right here and it will either come out right away or it will take some working so let's see what it does for me right now and ah came out right, away okay, so that comes out right there and then it slides through an area right here in the plastic and that's it and then you just pull it through the cover okay, okay, that was easy pc so that means the other side is going to require work and it's never the same twice so okay, so same thing on this side so give yourself some slack pull on that hold that tension there pull down i haven't figured out a trick to this yet there we go oh and then this slides up through here okay and then pull it through the cover and we're good to go right, oh now the harness okay, so we are going to remove all of this patting as you remove all of the small bits, so like the harness strap pads and the buckle cover these bits put these into a wash bag you know like a garment bag otherwise you may lose them i know that sometimes my washer tends to be like this dark pit and things get lost in there, so put these in a spot where they'll all stay together and you won't lose them okay and i'm gonna loosen this harness it just makes a little easier to get this pad off and there we go another reason why we want to loosen this harness is because on the back of this carrier it gives us access to the splitter place so this harness splitter plate is this is your pull strap for the harness tightener this is your harness adjuster strap and it's just connected right here, so by loosening that it gives you more slap underneath here on the bottom, so we just detach this oh by the way make sure you take a picture of which slots you're using or be sure to remember them if you're like me you will never remember which slots you use so you take a picture so that you can remember which slots to put this back through right, so we take these off and we pull the harness through okay, but that's just for the top we're still attached down here at the bottom right, so we take the buckle through and now we have to take the harness through the bottom so put the buckle tom through and the chest clip through that's one side and do it for the other side hoops it's just sliding there along the harness and our adjuster strap is there we go okay now you can start the washing machine yay okay that was a lot it'll take you five or ten minutes or 20 okay, but now you can get it clean okay and we know that your rear facing only see is going to need to be cleaned at some point or another right right okay? this is what the inside of the seat looks like and i wanted to see because you'll need to look at it at some point or another so that's what it looks like one thing i wanted to point out to you is that this is your carnis strap notice that i said strap okay it's one strap so i'm gonna show you something i'm gonna pull on the strap i just made one side longer than the other and i'll show you how to fix that okay so now what we're gonna do is we're gonna reassemble the seat we're going to put this back on okay, so oh by the way epp phone okay, so this is your safety phone okay, so let's get this back on, so we'll just put the buckle back through that kind of anchors it down, so it's not gonna shift around on us next, we'll get our buckle tongs sticking through, so the buckle tongue goes through and the chest clip that through same on this side okay and i want to do this as well and it goes through a little slit in the fabric right there okay, it'll probably come back through we'll probably have to do that again but that's okay for now alrighty next, we'll do our strap handles so make sure this is straight so get that nice and straight put this back through okay and again make sure that the handle is straight okay that looks right put this through here you see how that goes through again give your substance flat here and then turn it on its side like this and then put that up through here and slide that in and make sure that that's in there because that's the locking mechanism right there you want to make sure that it's locked into the spot here otherwise, it's not going to be locked and be safe do that for the other side okay straight straight go through should have some slack and then make sure i put it into this locking mechanism okay and it's locked in there and i'm gonna pull that snug just like that so that it's nice and locked in there again this is your locking mechanism it must be through there or it's not safe if you just try and lock it in under here it'll fall through and your seat will fall when you go to grab it up, so make sure it's locked in here it's a very important safety tip alright, now, i'm just going to pull this down and again i'm being careful over this area because i don't want to rip this it's a beautiful cover same back here okay now we're mostly put back together but i need to make sure that my harness is on correctly so what i'm gonna do first is i'm gonna buckle the harness i'm gonna make sure everything's nice and straight so i'm gonna pull this nice and straight here so that it looks like this chocolate in same for the other side buckle that okay, so i've got my straight straight edges here and i'm gonna do the same for the chest clips okay, okay, so nice and straight sure the chest clip is even you see how straight that is okay now already something feels off to me you remember how i said i pulled one side longer than the other i'm going to show you what i did okay i'm exaggerating here so i'm going to show you how to fix this? okay, so one side is longer than the other on the side that's shorter i need to fix that right so because this is all one strap that it just goes from one side to the other it goes under the seat like that i'm gonna grab it down here at the hip portion and i'm just gonna grab that length that i need from the longer side, so i'm just pulling pulling this way so i'm grabbing and i'm pulling up this way, so i'm going this way and then up here and so now i just need to pull that strip that way let's see how close i am i'm getting there, oh very good okay, i got it and now i can route it through the back of the seat and i was in the center slot, so just route it through the center right through the center slots and then i need to make sure this everything is in a nice straight line nothing is twisted so now i need to make sure that this is nice and straight put that on like that it's over the hooks everything looks good i'm gonna pull that strap tight looks good and so the cover is back on everything's nice and neat and oops if i want to put the pad back on, i can put the pad back on and let me show you how to do that real quick so this pad this lines up with the harness slots so the pad slides under like this make sure that my lap straps come through here there's a slot for those that looks good and i first book there it is my head pad goes right here like this and i'm good to go so that is how you put the cover back on take the cover off and put the cover back on the maxi cozy coral xp thank you for watching and please subscribe to car seatblog。

place the car seat base in the back seat of your vehicle unfold the load leg if using next check the base angle if the angle indicator is not correct adjust the base the adjustment handle is at the back of the base squeeze the adjustment handle lift or lower the back of the base then release the handle so the base foot locks into a position the angle indicator will turn completely green when correct no red should be showing next lift the release lever you must lift the release lever in order for the latch lower anchor belts to loosen now release the lower anchor connectors from their storage location press in the red button push the connector into the storage location then pull it and the belt out now attach the lower anchor connectors to the vehicle anchors review your vehicle owners manual for latch lower anchor locations and latch lower anchor use next push the release lever down you must push the release lever down in order for the latch lower anchor belts to tighten then push down on the base to tighten the lower anchor belts the belts will begin to automatically retract and tighten as you push down now check the tightness indicators the red will turn completely green when tightened correctly no red should be showing the final step is to extend the load leg squeeze the buttons on the load leg and pull it down until it meets the vehicle floor release the buttons lift the front of the base while holding the load leg in place to lock it into position it must be perpendicular to the vehicle floor now the base installation is finished this step is to install the inner and outer carriers on the installed base align the slots on the sides of the outer carrier with the lock bars in the base push down, firmly on the sides in front of the outer carrier to lock it into the base pull up on the front two corners of the outer carrier to make sure it's locked into the base then install the inner carrier to the outer carrier pull up on the front two corners and the back of the the inner carrier to make sure it's locked to the outer carrier the carry handled must be locked and in position one or position two lastly re check the angle indicator on the base to make sure it is correct。

大家好,我是仓鼠,今天我带大家来看一下我们迈克士的睿智小巨人,也就今天 polo 这一款的一个安装, 这个就是我们的一个爱车被子接口,有的是在那个靠背和坐垫那个缝隙里面,有的呢就是直接裸露出来的,有一个引导槽,这个是我们车座椅上的一个接口杆,握住这个以后拉出我们的接口杆非常轻松。好的,另外一端也是一样的, 然后我们的接口杆对准我们接口槽里面的接口环推进去就 ok 了,非常简单。 我们刚才安装了我们下面的两个接口杆以后,我们就找到他的上搭带,就拖布连接带,然后找到汽车靠背 背后的一个挂钩猫点的位置,然后直接挂上,挂上以后,然后我们再收紧这个上拉带,收紧这个皮带就就 ok 了, nice。